[ADA Standards § 4.30.6]    Yes    No If No, install a sign with raised characters and Braille on the wall adjacent to the latch side of the door and centered 60 inches above the...
Search Results "RERC Rec-Tech: Rehabilitation Engineering Research Center on Recreational Technologies"
-
H1
-
1132A.6 Closer-effort to operate doors
operate doors shall not exceed 8½ pounds (38 N) for exterior doors and 5 pounds (22 N) for interior doors, such pull or push effort being applied at right angles to hinged doors and at the center...
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device. ...
-
4.10.3 Hall Call Buttons
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
4.10.3 HALL CALL BUTTONS
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
Tips for Interacting with People with Disabilities
., Tips for Interacting with People with Disabilities, 2011, published and distributed by Harris Family Center for Disability and Health Policy, www.hfcdhp.org....
-
National Trail Surfaces Study Final Report
Sherril York, Executive Director National Center on Accessibility 501 N Morton St, Suite 109 Bloomington, IN 47404-3732 (812) 856-4422 (Voice) (812) 856-4421 (TTY) www.ncaonline.org...
-
2. Pick Up and Drop Off Locations with Multiple Entrances
., shopping malls, employment centers, schools, hospitals, airports), the paratransit operator should pick up and drop off the passenger at the entrance requested by the passenger, rather...
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device....
-
2. Pick Up and Drop Off Locations with Multiple Entrances
., shopping malls, employment centers, schools, hospitals, airports), the paratransit operator should pick up and drop off the passenger at the entrance requested by the passenger, rather...
-
[ADA Title III §36.403(b)] Primary function
Areas that contain a primary function include, but are not limited to, the customer services lobby of a bank, the dining area of a cafeteria, the meeting rooms in a conference center, as...
-
11B-303.5 Warning curbs
A warning curb is not required when a guard or handrail is provided with a guide rail centered 2 inches (51 mm) minimum and 4 inches (102 mm) maximum above the surface of the walk or sidewalk...
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device....
-
904.4 Sales and Service Counters
existing mail boxes, the counter shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered...
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
The Severe Fire Risks of Storing a Dead Hybrid Vehicle
When a traditional combustion engine car breaks down, it slowly rusts and leaks oil onto the driveway....
- Southern Adirondack Independent Living Center (SAIL) - Ballston Spa and Queensbury, NY
-
b. Summary of Objectives of, and Legal Basis for, the Proposed Regulation
Proposed § 36.303(g)(2)(ii) states that “[m]ovie theaters may meet their obligation to provide captions to persons with disabilities through use of a different technology, such as open movie...
- Dayle McIntosh Center for the Disabled - Anaheim, Laguna Hills, CA
- Bradley 2 Station Express Deck Lavatory System EXD-2N
- Triton Centerset Commercial Bathroom Sink Faucet
- Memphis Center for Independent Living (MCIL) - Memphis, TN
-
Wheelbase Definition
Wheelbase Definition For the purpose of this analysis, wheelbase is defined as the distance from the center of the primary drive wheel to the center of the caster measured parallel to...