The AL-Series is best for buildings with medium to high traffic flow, such as interior office doors, banks, retail spaces and hotel guest areas....
Search Results "Exterior Space"
- Allegion Schlage AL-Series Mechanical Locks
-
F216.5 Parking
Parking spaces complying with 502 shall be identified by signs complying with 502.6. EXCEPTIONS: 1....
-
216.5 Parking
Parking spaces complying with 502 shall be identified by signs complying with 502.6. EXCEPTIONS: 1....
-
General: ADA Standard Section 306.3.1
Section 306.3.1 of the ADA Standards covers information in the current ADA Standards for knee clearance.
-
Assistive Listening System (ALS)
An amplification system utilizing transmitters, receivers, and coupling devices to bypass the acoustical space between a sound source and a listener by means of induction loop, radio frequency...
-
Construction and Maintenance Practices
Field changes, such as increasing the slope on a walkway to reduce the cost of asphalt paving or increasing the drop at an exterior door threshold to reduce issues with driving rain, can...
-
216.5 Parking
Parking spaces complying with 502 shall be identified by signs complying with 502.6. EXCEPTIONS: 1....
- Diversified Woodcrafts ADA Instructor's Desk 1214K-L-ADA
-
How to Measure Access Aisles
In the final rule, the Board has clarified how parking spaces and access aisles are to be measured....
-
201.1 Scope
In determining the appropriate number and location of a particular element, space, or fixture, the following factors shall be among those considered: (i) population to be served...
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
3. Temporary Solutions for Emergency Sheltering - Parking
Three regular parking spaces will make two accessible parking spaces with a shared access aisle. Provide a sign designating each accessible parking space....
-
11B-209.2.1 Passenger drop-off and loading zones
and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying with Section 11B-503 in every continuous 100 linear feet (30480 mm) of drop-off and loading zone space...
-
11B-209.2.1 Passenger drop-off and loading zones
and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying with Section 11B-503 in every continuous 100 linear feet (30480 mm) of drop-off and loading zone space...
- Geberit Monolith Floor Mounted Toilet with White Glass
-
Problem One
Problem One: Parking is available, but no accessible parking is provided or there are not enough accessible parking or van accessible spaces....
-
Problem One
Problem One: Parking is available, but no accessible parking is provided or there are not enough accessible parking or van-accessible spaces....
-
11B-106.5 Defined terms
. ◼ ACCESS AISLE ACCESSIBILITY ACCESSIBILITY FUNCTION BUTTON ACCESSIBLE ACCESSIBLE ELEMENT ACCESSIBLE MEANS OF EGRESS ACCESSIBLE ROUTE ACCESSIBLE SPACE ADAPTABLE...
- Design for All Foundation
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....