Exceptions: 1. ... 2....
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
3104.2 Separate structures
-
§ 35.108(d)(1)(ix)
(ix) The six-month “transitory” part of the “transitory and minor” exception in paragraph (f)(2) of this section does not apply to the “actual disability” or “record of” prongs of the definition...
-
§ 38.113(d)(3) Exception
Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d) (1) or (2), platform or portable lifts complying with §38.125(b) of this part, or...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
11B-232.2.1 Cells with mobility features
At least 2 percent, but no fewer than one, of the total number of cells in a facility shall provide mobility features complying with 807.2. ...
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
[ADA Title III §36.104] Readily achievable
In determining whether an action is readily achievable factors to be considered include -- 1) The nature and cost of the action needed under this part; 2) The overall financial resources...
-
1009.8 Two-way communication
Two-way communication systems are not required in Group I-2 or I-3 facilities....
-
11B-809.5.2 Residential dwelling unit smoke detection system and carbon monoxide detection system
To see this Section, consult California Code of Regulations, Title 24, Part 2 - 2022 California Building Code (2022 CBC), available for purchase from International Code Council (http://www.iccsafe.org...
-
CHAPTER 35 REFERENCED STANDARDS
To see the entire Chapter, consult California Code of Regulations, Title 24, Part 2 - 2022 California Building Code (2022 CBC), available for purchase from International Code Council (http...
-
Corbin Russwin Inc. ED3000 Series Crossbar Exit Device
industrial Office and retail complexes Transportation facilities Hotels and conference centers Religious facilities Advantages Meets ANSI Grade...
-
Sargent 1130 Series Door Closer
springs Valves are captivated to prohibit vandalism Adjustable backcheck valve is standard Models available with spring adjustment along with sized models UL and ULC listed ANSI Grade...
-
BEA Inc. PBS45 Series Door Access 4.5" Square Push Plate (Push to Open)
Grade 304 stainless steel maximizes corrosion resistance and prevents rusting Stainless steel materials are 100% recyclable and environmentally friendly Options include hard...
-
Yale 5800 Series Cast Iron Door Closer
cover • Spring power adjustment • Hold-open and heavy-duty arms arm configurations • Sleeve nuts included with all models Certifications • Certified for ANSI/BHMA A156.4 Grade...
-
Schumacher 1400 Series Limited Use Limited Application (LULA) Elevator
Advantages Automatic controls; commercial grade components and fixtures Two-speed automatic car doors Holeless design does not require excavation for hydraulic cylinder Best...
-
Blueraven Creative SensoryPEN™ for Exhibits and Audio Tours
These codes may be embedded into exterior-grade aluminum buttons or diecut shapes or in temporary interior substrates like vinyl and paper....
-
BEA Inc. PBR45 Series Door Access 4.5" Round Push Plate (Push to Open)
Grade 304 stainless steel maximizes corrosion resistance and prevents rusting Stainless steel materials are 100% recyclable and environmentally friendly Options include hard...
-
C. ADA Fundamentals
. § 12102(2)(B) & (C)....
-
§ 36.303(g)(3) Minimum requirements for captioning devices
the following Table: Number of movie theater auditoriums exhibiting digital movies Minimum required number of captioning devices 1 4 2-...
-
F212.3 Sinks
Mop or service sinks shall not be required to comply with F212.3. 2. ...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
407.2.1.5 Signals
Destination-oriented elevators shall not be required to comply with 407.2.1.5 provided that visible and audible signals complying with 407.2.2 indicating which elevator car to enter are provided. 2....
-
1630.1(a)
(ADA), requiring equal employment opportunities for qualified individuals with disabilities, and sections 3(2), 3(3), 501, 503, 506(e), 508, 510, and 511 of the ADA as those sections pertain...
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
