Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
Search Results "End-Opening Door"
-
1010.1.8 Door arrangement
-
Cal-Royal 900 Series Hydraulic Door Closers
Cal-Royal’s Finest Hydraulic Door Closer Series Meeting The Highest Industry Standards, Grade 1 Heavy-Duty Full Feature Multi-Size Commercial Door Closer For Use In Office Buildings...
-
A4.17.5 Doors
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
A4.17.5 DOORS
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
Hager Companies 5100 Series - Heavy Duty Surface Door Closer
5100 Series Closers are heavy duty door closers constructed of cast iron to be installed on exterior and interior doors that are subject to high use and potential abuse....
-
Cal-Royal CR441 Series Hydraulic Door Closers
Cal-Royal’s Finest Hydraulic Door Closer Series Meeting The Highest Industry Standards, Grade 1 Heavy-Duty Double Lever Arm With Extra Smooth Action Full Feature Multi-Size Commercial...
-
Measuring Door Openings
Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
Doors in a Series
The required separation between doors and gates in series and specifications for maneuvering clearances at doors will ensure sufficient space regardless of the door swing....
-
Cal-Royal 700 Series Hydraulic Door Closers
Hydraulic door closer dual valve, closing and latching speed controlled by two separate regulating valves....
-
CRL PR40 Series Adjustable Spring Power Surface Mounted Door Closers
08 7100 CRL DC50 Series ANSI Grade 1 Surface Mounted Door Closers Applicable for Doors Ranging From 26" to 54" Wide and 33 to 264 Pounds Dual Valve Closing and Latching Speed Control...
-
Cal-Royal Hydraulic Door Closers 400 Series
Standard Duty Commercial Hydraulic Door Closer Precision Engineering for New Construction Meets And Exceeds ANSI Standard 156.4 Grade 2 Sized Door Closer, Sizes 2, 3 And 4 For All...
-
DORMA BTS75V SERIES DOOR CLOSER
Floor-Concealed Door Closer The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation....
-
BEA Inc. LZR Microscan Installation Video
The LZR-microscan is the next generation sensor system for swing door safety. ...
-
Doors [4.35.3]
Doors [4.35.3] The size of rooms is further determined by the location and swing of doors....
-
Revolving Doors or Turnstiles
A commenter advised that no revolving doors or turnstiles should be permitted on an accessible route. Response....
-
Allegion Falcon SC70 Series Surface Mounted Door Control
Falcon SC70 Series heavy duty closers are built for busy commercial applications that demand reliable door control and easy maintenance. ...
-
T302.3 Openings
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....
-
Doors at Entrances to Businesses
However, some older doors are less than 36 inches wide and may not provide enough width (32 inch clear width when fully opened). Door openings can sometimes be enlarged....
-
Hager Companies 5400 Series - Standard Duty Surface Door Closer
The closers are non-handed to permit installation on doors of either hand. These closers have fixed spring sizes....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Doors and Gates in Series [§404.2.6]
Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
-
Guest Rooms
Because of the social interaction that often occurs in lodging facilities, an accessible clear opening width is required for doors and doorways to and within all guest rooms, including those...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
