Required Number [§208] This guide explains requirements in the ADA Standards for parking. Accessible parking spaces are required for each parking facility on a site, such as...
Search Results "Elevator Car Door"
-
Required Number [§208]
-
§ 38.123(a)(1)
(1) The minimum clear floor area shall be 35 inches by 60 inches. Permanently installed fixtures may overlap this area a maximum of 6 inches, if the lowest portion of the fixture is...
-
Figure 307.4 Vertical Clearance – Drawing from the U.S. Access Board
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Doors shall have a clear opening at least 32 inches wide when measured from the face of the door to the opposite stop when the door is opened 90 degrees and shall have hardware usable with...
-
Allegion Glynn-Johnson Push/Pull Latches
Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Glynn-Johnson uses only state-of-the-art technology and manufacturing processes....
-
Cal-Royal Legacy Series Locksets
Square corner face plate and 5" round corner backsets optional Option 3 Hour Fire Rated UL Listed Latch ANSI Standard A156.2 Grade 3 Fits 1-3/8" to 1-3/4" wood or metal doors Round...
-
TownSteel CDC-110 Classroom Instruder Mechanical Cylindrical
Turning inside lever any time opens the door....
-
Stanley QME 100 Series Grade 1 Heavy Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
Stanley QMS 100 Series Grade 1 Heavy-Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
TownSteel MS Series, Grade 1 With "W" Escutcheon Mortise Locks
It's specially designed to cover extra holes of exiting door prep....
-
TownSteel CSRC Series, Grade 2, Clutched, Conical Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
TownSteel CB Series, Grade 2 Non-Clutched Flat Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
Cast Pull Combined with Coordinating Push Plate Gives Your Door A Finished Look and a Durable Finish. The most popular Hiawatha pull plate combinations are shown here....
-
Figure 404.2.4.1(a) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Pull Side – Drawing from the U.S. Access Board
-
Yale Affinity® Smart Card Locks
Powerful audit capabilities: With a time-stamped audit trail, management can quickly and easily identify which cards have been used to access at the door....
-
Allegion Schlage LT Series Mechanical Locks with Tubular Interconnect
Safety and security are paramount when choosing door hardware, but continuity in design is also key for those projects that require enhanced aesthetic appeal....
-
Stanley QCL 200 Series Grade 2 Standard Duty Cylindrical Locks
Certifications ANSI/BHMA A156.2 Series Grade 2 ANSI A117.1 Accessibility Code (ADA Compliant) UL/cUL listed(3-hours) for "A" label single door applications (4' x 8...
-
DORMA C800 Series Lockset
Easy installation DORMA C800 Series locksets are easy to install in both wood and hollow metal doors with ANSI/BHMA Standard A156.115 preparations for cylindrical locks....
-
Stanley QCI 200 Series Grade 2 Standard-Duty Interconnected Locks
two (2) ball bearings inserted to prevent drill attacks ADA thumbturn Certifications ANSI/BHMA A156.12 - 1999 Grade 2 UL/cUL listed (3-hours) for "A" label single door...
-
Figure 404.2.4.1(b) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Push Side – Drawing from the U.S. Access Board
-
Scenario 8 – Accessibility
Ayana recently enrolled in a school that does not have an elevator. The school was built in the early 1960s and, due to limited resources, the district has never altered the building....
-
Stanley QCL 100 Series Grade 1 Heavy Duty Cylindrical Locks
Certifications ANSI/BHMA A156.2 Series Grade 1 ANSI A117.1 Accessibility Code (ADA Compliant) UL/cUL listed(3-hours) for “A” label single door applications (4' x 8...
-
Corbin Russwin Inc. ML20900 ECL Series Mortise Locksets
The self-contained integral continuous-duty actuator allows installation in standard mortise prep with slight modification by door manufacturer....
