Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
Search Results "Clear Width at Turn"
-
608.2.3 Alternate Roll-In Type Shower Compartments
-
20. Does topping off a play surface trigger its replacement with an accessible surface?
surface along accessible routes located within the boundary of the play area, including the entry and exit points of the ground level play components required to be accessible, as well as at clear...
-
5.8.2.7 Base Support Allowance
Base support is permitted to obstruct the clear floor space if it fits within the allowed base support volume. Base supports can be a maximum of 1½ inches high....
-
604.8.1.6 Lavatory
The lavatory shall be mounted so as not to overlap the clear floor space areas required by section 604 for the wheelchair accessible toilet compartment and shall comply with section 606....
-
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)]
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)] Clear floor space for either a forward or a side approach is permitted for cabinets, counters, sinks, and appliances....
-
Controls
Clear floor space at controls should be located outside the door swing....
-
Security Bollards [7.4] and Security Devices
Security Bollards [7.4] and Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least...
-
Controls [9.2.2(5)]
Controls [9.2.2(5)] All controls in accessible units, sleeping rooms, and suites must comply with 4.27, which provides specifications for clear floor space, height of operable controls...
-
4.8.4 LANDINGS
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
Sargent 8888 Reversible Rim Exit Device
The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function....
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
cover plate finishes available Exposed fastener for easy maintenance Key Specifications Floor/Floor, Floor/Wall Conditions Movement: +/- 50% Joint width...
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
linear waviness Installation not weather sensitive Utilizes lubricant adhesive (JPR004) Key Specifications: Architectural Compression Seals Joint width...
-
Whitehall Mfg. 4121ADA One-Station Compact Scrub Sink
Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 36" Accessibility: ADA (if mounted at compliant height) Waste Location...
-
Grainger Anti Ligature Toilet Paper Holder
Specs Item: Toilet Paper Holder Color: Silver Material:Stainless Steel Finish: Stainless Steel Mounting: Wall Capacity: 4" Roll Width...
-
Whitehall Mfg. 4123ADA Three-Station Compact Scrub Sink
This is a three-station unit measuring 108" wide Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 108" Accessibility: ADA...
-
Whitehall Mfg. 4122ADA Two-Station Compact Scrub Sink
Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 72" Accessibility: ADA (if mounted at compliant height) Waste Location...
-
Section 1630.2(j)(1)(i) Broad Construction; not a Demanding Standard
As Congress noted in the legislative history of the ADAAA, “[t]o be clear, the purposes section conveys our intent to clarify not only that ‘substantially limits’ should be measured by a...
-
General Regulatory Approach
We must structure our response to this mandate in a way that allows for clear and consistent implementation by the carriers, and clear and consistent enforcement by the Department....
-
Diagonal Curb Ramps
These curb ramps must have a 48 inch minimum clear space at the bottom....
-
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis)
This knee and toe space would also have to be clear of obstructions....
-
Display Screens
suggested that we change the requirement for display screens such that they must not only be visible, but also readable, from a point located 40 inches (1015 mm) above the center of the clear...
-
Section 37.9 Standards for Transportation Facilities
Section 37.9 Standards for Transportation Facilities This section makes clear that, in order to meet accessibility requirements of this rule, vehicles must comply with appendix A to part...
