The requirements include but are not limited to the type, size, spacing, and color of letters for visual characters and the type, size, location, character height, stroke width, and line...
Search Results "Line Spacing (Raised)"
-
For People with Disabilities, Which Circulation Paths Are Usable, Available, and Closest?
-
227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with 227 and 904....
-
AIAU Accessible Architecture: Designing for Success (Parts 1-3)
In Part 2, go in depth on compliance issues regarding accessible routes, ramps, parking spaces, protruding objects, doors and clear floor space, controls, and counters....
- The Design Linc
-
(a) Single-story dwelling units
Lofts are exempt provided that all other space within the unit is on an accessible route....
- GameTime Nature Discovery Table
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
This data depicts the amount of space required by users of wheeled mobility devices to perform a 90-degree turn ("L-Turn")....
- Integralift Fixed Ceiling Lift Short Instructional Video
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
Scoping [4.1.3(12)]
Scoping [4.1.3(12)] ADAAG covers fixed or built-in storage facilities in public or common use spaces and requires access to at least one of "each type."...
-
DIVISION 8: SPECIAL ROOMS, SPACES AND ELEMENTS
[See subsections ...]
-
A4.26.2 Size and Spacing of Grab Bars and Handrails
This specification allows for alternate shapes of handrails as long as they allow an opposing grip similar to that provided by a circular section of 1‒1/4 in to 1‒1/2 in (32 mm to 38...
-
A4.26.2 SIZE AND SPACING OF GRAB BARS AND HANDRAILS
This specification allows for alternate shapes of handrails as long as they allow an opposing grips similar to that provided by a circular section of 1-1/4 in to 1-1/2 in (32 mm to...
-
ADA Compliance BRIEF: Restriping Parking Spaces
U.S. Department of Justice Civil Rights Division Disability Rights Section
-
DIVISION 8: SPECIAL ROOMS, SPACES, AND ELEMENTS
[See subsections ...]
-
4.3.4 Knee and Toe Clearances
For example, the ADA-ABA has a sloped line indicating the depth of knee clearance at the plane of the knees and the depth somewhere above the ankles....
-
4. Switching Between Voice Mode and TTY Mode
This is especially necessary for silent calls because it allows the call taker to first query the line by voice and then quickly switch to query the line by TTY....
-
16) Elevator hoistway floor designations and car controls
16) Elevator hoistway floor designations and car controls ADAAG: Must have raised and brailled characters (§§4.10.5; 4.10.12)....
-
§ 38.83(b)(5) Platform barriers
A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the vehicle until the lift is in its fully raised position....
-
§ 38.125(b)(5) Platform barriers
A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the car until the lift is in its fully raised position....
-
§ 38.95(b)(5) Platform barriers
A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the car until the lift is in its fully raised position....