Moreover, the standards preclude the use of a pinch grip, which is desirable to people who are able to use it effectively....
Search Results "ISO: International Organization for Standardization"
-
4.3.8 Operating forces
-
Sec. 469.151(a)(2)
of the building or facility for which a request for a waiver or modification is made, or the owner's designated agent, presents proof to the commission that compliance with a specific standard...
-
Boarding platform
A platform in a level boarding bus system raised above standard curb height in order to align vertically with the transit vehicle entry for level boarding and alighting....
-
406.1 General
Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non-proprietary formats....
-
§ 35.150(b)(5)(iii)
(iii) Where an existing sauna or steam room was designed and constructed to seat only two people, it shall be exempt from the provisions of § 241 of the proposed standards....
-
§ 35.150(b)(5)(i)
(i) Where an existing play area has less than 1000 square feet, it shall be exempt from the provisions of section 240 of the proposed standards;...
-
H10
[ADA Standards § 4.19.5] Yes No...
-
M11
[ADA Standards § 4.19.5] Yes No...
-
H24
[ADA Standards § 4.17.3] Yes No...
-
K2
[ADA Standards § 5.3; 4.3.8] Yes No...
-
J5
[ADA Standards § 4.15.4] Yes No...
-
§ 36.406(c)(3) Facilities with residential units and transient lodging units
Residential dwelling units that are designed and constructed for residential use exclusively are not subject to the transient lodging standards....
-
NOTE
NOTE: Sections 4.1.1 through 4.1.7 are different from ANSI A117.1 in their entirety and are printed in standard type (ANSI A117.1 does not include scoping provisions)....
-
§40.1 Purpose.
This part prescribes standards for the design, construction, and alteration of publicly owned residential structures to insure that physically handicapped persons will have ready access...
-
Compilation of Instruments and Measurement Methods for Surface Accessibility
Methods for Surface Accessibility During the course of this project the following information was developed as background information to assist industry in developing their guidelines and standards...
-
Must accessible routes or crossings be marked?
The ADA Standards require accessible parking spaces and access aisles to be marked, but they do not require accessible routes, including portions crossing vehicular ways, to be marked....
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
§ 37.7(a)
(a) For purposes of this part, a vehicle shall be considered to be readily accessible to and usable by individuals with disabilities if it meets the requirements of this part and the standards...
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
224.6.2 Facilities with Residential Units and Transient Lodging Units
Residential dwelling units that are designed and constructed for residential use exclusively are not subject to the transient lodging standards....
-
Automated Announcement Systems
Compliance reviews conducted by DOT, as well as multiple Federal lawsuits, have shown that, in vehicle-operator-based announcement programs, compliance with the existing regulatory standards...
-
11B-406.5.3 Landings
[2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
[2010 ADA Standards] 2....
-
11B-608.6 Shower spray unit and water
[2010 ADA Standards] EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities...