percent (50%) of the holes on miniature golf courses to be accessible and connected to an accessible route (which must connect the last accessible hole directly to the course entrance or exit...
Search Results "Ground Floor Exit"
-
Miniature golf courses. (Section-by-Section Analysis)
-
Common Use Circulation Paths
Common Use Circulation Paths In addition to the approach, enter, and exit requirements of TAS 203.9, employee work areas must also comply with the circulation path requirements of TAS...
-
Miniature golf courses. (Section-by-Section Analysis)
percent (50%) of the holes on miniature golf courses to be accessible and connected to an accessible route (which must connect the last accessible hole directly to the course entrance or exit...
-
Clear Width [§405.5]
The width of ramps that are part of a means of egress may further be determined by applicable life safety codes and requirements for minimum exit widths greater than 36”....
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground....
-
A4.6.4 Signage
Signs designating parking places for disabled people can be seen from a driver’s seat if the signs are mounted high enough above the ground and located at the front of a parking space....
-
A4.6.4 SIGNAGE
Signs designating parking places for disabled people can be seen from a driver's seat if the signs are mounted high enough above the ground and located at the front of a parking space....
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground....
-
GENERAL CONSIDERATIONS FOR TRAFFIC SIGNAL CONTROLLED ROUNDABOUT PEDESTRIAN CROSSINGS
In the U.K., exit and entrance crossing phases are separated in both time and space....
-
Corbin Russwin Inc. Access 600 RNE1 Electrified Door Hardware
The Access 600 RNE1 seamlessly integrates a full range of locks into your Wiegand Access Control System – from mortise locks to cylindrical locks and exit devices – all Grade 1 Corbin Russwin...
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
-
5.8.2.8 Knee and Toe Clearance Recommendations Summary
For such a measurement, the top of the breast platform will be moved to 34 inches above the ground, and then the clearance dimensions will be measured just as they would be on any stationary...
-
You must not discriminate against qualified individuals with a disability
[Sec. 382.7(a)(3)] For example, if you choose to provide ground transportation and overnight accommodations to passengers because of a flight cancellation, you must ensure that the ground...
-
Physical Accessibility
For example, if stairs lead to the upper floors of a school and the school does not have an elevator, ramp, or chair lift, and a student with a disability is unable to traverse the stairs...
-
SciFit Inclusive Fitness PRO1 - Upper Body Machine
It is also ideal for ground-based training....
-
Gerber Manual Flush Valve 44-762
1/2" to 5" from center of angle screw stop to center of the main housing Copper casting and chrome plated housing ADA compliant metal oscillating handle 1" IPS angle screw stop Ground...
-
Coin Slot Height
Is it mounted with the coin slot no higher than 54" above the floor, and one pay phone on that floor with the highest operable element no higher than 48" above the floor?...
-
General: ADA Standard Section 211.1
Section 211.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for drinking fountains.
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.2 Touch screen call console arrangement
The accessibility function button shall be located at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
11B-411.2.1.3.2 Touch screen call console arrangement
The accessibility function button shall be located at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
-
Attachment B – Code References
In alteration projects involving buildings and facilities previously approved and built without elevators, areas above and below the ground floor are subject to the 20-percent disproportionality...
-
1002.4.4.2 Side Entry
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
