Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
Search Results "Ground Floor Exit"
-
11B-1002.4.4.1 Width and length
-
11B-411.2.1.7.4 Adjacency assignment
Exception: The most adjacent elevator serving the selected floor shall be assigned by hall call consoles located outside the elevator landing....
-
Accessible Fishing Piers and Platforms
If railings, guards, or handrails are provided, accessible edge protection and clear floor or ground space at accessible railings are required....
-
2. Follow the Accessibility Standards for Play Areas
Within the play area, the clear width of the ground level accessible routes shall be 60 inches minimum....
-
11B-1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with Section 11B-1008.2.5....
-
1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with 1008.2.5....
-
11B-1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with Section 11B-1008.2.5....
-
11B-1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with Section 11B-1008.2.5....
-
Mesa Safe Company MHRC916E Electronic Hotel Safe
It comes with anchor holes that you can secure your safe onto the wall or floor to ensure proper and permanent placement to prevent removal and theft....
-
Mesa Safe Company MH101E Electronic Hotel Safe
It comes with anchor holes that you can secure your safe onto the wall or floor to ensure proper and permanent placement to prevent removal and theft. ...
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
AUTOMATIC DOOR
The switch that begins the automatic cycle may be a photoelectric device, floor mat or manual switch....
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
AUTOMATIC DOOR
The switch that begins the automatic cycle may be a photoelectric device, floor mat or manual switch....
-
Gamco Fixed Position Tilt Mirror - FT-Series
All welded construction; welded-frame, corners are welded and ground smooth. Back Panel - Shock absorbing material is placed between mirror and back panel....
-
Landscape Structures Power Lifter™ Chinning Bar
FEATURES: Increases upper-body strength Closer to the ground for kids of all ages and abilities Wheelchair accessible Your choice of colors Maximum Fall Height: 49" (1,24 m...
-
What surface characteristics are required of an accessible route?
The Americans with Disabilities Act Accessibility Guidelines (ADAAG) requires only that newly-constructed or altered ground and floor surfaces of accessible routes on sites and in buildings...
-
Accessible Routes Throughout the Museum
Objects, signage, light fixtures, and exhibitry (or tree branches and shrubs along outdoor paths) can present bumping hazards if they are between 27 and 80 inches above the ground....
-
§40.3(b)(1)
(1) Any portion of a residential structure or its grounds which need not, because of its intended use, be made accessible to, or usable by, the public or by physically handicapped persons...
-
11B-809.8.4 Door signal devices
The activating mechanism shall be mounted 48 inches (1219 mm) maximum above the floor and connected to permanent wiring....
-
11B-809.8.4 Door signal devices
The activating mechanism shall be mounted 48 inches (1219 mm) maximum above the floor and connected to permanent wiring....
-
Section 2. Multistory dwelling unit
"Multistory dwelling unit" means a dwelling unit with finished living space located on one floor and the floor or floors immediately above or below it....
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
