A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
Search Results "Grade 1 Braille"
Filters
Commonly Searched Documents
-
11B-1010.1 Turning space
-
11B-406.3.1 Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
11B-504.4 Tread surface
Exception: Treads shall be permitted to have a slope not steeper than 1:48....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-406.3.1 Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
Minimum Number of Wheelchair Spaces
The proposed rule specified 1% scoping (on top of 6 required wheelchair spaces) for assembly areas with over 500 seats....
-
Accessible Medical Equipment
For participants with mobility limitations, we use exam and procedural tables and chairs that: [See Resources below and Section H] D.1....
-
BEA Inc. Jamb Style Door Access PTE (Push To Exit)
Part of the PBJ Series of Push Plates Grade 304 stainless steel maximizes corrosion resistance and reduces rusting Stainless steel materials are 100% recyclable and environmentally...
-
Spectrum Aquatics Glacier Platform Pool Lift
600 pound operating load capacity Stainless steel construction (electropolished 316L grade) Quiet and stable operation Includes a clear gate door to prevent entrapment...
-
BYO Recreation Inc. Fun Hoop
FEATURES: Commercial grade components specifically engineered to resist corrosion, fading and mildew....
-
M303.2.4.1.2 Height
Between 9 inches (230 mm) and 27 inches (685 mm) above the floor, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for every 6 inches (150 mm) in height...
-
Horse Accessible Gates
This gate is not accessible because it is narrower than the minimum width required for passage of a wheelchair (32 inches) and the bar across the opening is higher than 1 inch....
-
F208.2 Minimum Number
Table F208.2 Parking Spaces Total Number of Parking Spaces Provided in Parking Facility Minimum Number of Required Accessible Parking Spaces 1 to 25...
-
Accessible Amusement Rides
Bush, New Freedom Initiative, February 1, 2001 The recreation facility guidelines described in this guide focus on newly designed or newly constructed and altered amusement rides....
-
Resting Intervals [1017.8]
Resting intervals are required between trail segments any time the running slope exceeds 1:20 (5 percent)....
-
Resting Intervals [1016.8]
Resting intervals are required at the top and bottom of an ORAR section any time the running slope exceeds 1:20 (5 percent)....
-
§8.3 Program or activity
Program or activity means all of the operations of: (a)(1) A department, agency, special purpose district, or other instrumentality of a State or of a local government; or (2) The...
-
10.3.2(4)
key stations, the platform or a portion thereof and the vehicle floor shall be coordinated so that the vertical difference, measured when the vehicle is at rest, is within plus or minus 1‒...
-
1017.1 General
When an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1017 on a portion of a trail, Exception 1 permits the portion of trail to...
-
Section 4.1.6, Alterations (Section-By-Section Analysis and Response to Comments)
First, if any existing element or space is altered, the altered element or space must meet new construction requirements (section 4.1.6(1)(b))....
