permanent rooms and spaces in the lodging facility must be mounted on the wall (not the door) adjacent to the latch side of the door and centered 60 inches above the floor so that they can...
Search Results "Trash Can (Outdoor)"
-
Signage
-
Drinking Fountains
(This can be accommodated by the use of a "hi-lo" fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who...
-
Visual Alarms
Result: People who are deaf have no way of knowing that a building emergency has been declared while others who can hear are alerted by the audible alarm....
-
§ 38.77(c)
seats, vehicle driver seat platforms, and fare boxes, if applicable, shall be located so as to allow a route at least 32 inches wide so that at least two wheelchair or mobility aid users can...
-
11B-223.1.1 Alterations
In this way, people with disabilities can have access to the full-range of services provided by a medical care facility....
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-206.4 Entrances
Where no public entrance can comply with 206.4 under criteria established in 202.5 Exception, then either an unlocked entrance not used by the public shall comply with 206.4; or a locked...
-
Appendix A to Part 37—Modifications to Standards for Accessible Transportation Facilities
Like all regulations, the ADAAG also can be found by using the electronic Code of Federal Regulations at http://www.gpoaccess.gov/ecfr....
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-206.4 Entrances
Where no public entrance can comply with 206.4 under criteria established in 202.5 Exception, then either an unlocked entrance not used by the public shall comply with 206.4; or a locked...
-
603.2.3 Door Swing
occupant accessed only through a private office and not for common use or public use shall be permitted to swing into the clear floor space or clearance provided the swing of the door can...
-
603.2.3 Door Swing
occupant accessed only through a private office and not for common use or public use shall be permitted to swing into the clear floor space or clearance provided the swing of the door can...
-
302.2 Carpet
Carpets and permanently affixed mats can significantly increase the amount of force (roll resistance) needed to propel a wheelchair over a surface....
-
302.2 Carpet
Carpets and permanently affixed mats can significantly increase the amount of force (roll resistance) needed to propel a wheelchair over a surface....
-
608.6 Shower Spray Unit and Water
A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided....
-
Water Closet Clear Floor Space in Toilet Compartments
However, in residential dwelling units, an accessible lavatory adjacent to water closets can overlap this space (18 inches minimum from the water closet centerline) if additional space is...
-
Staff Training
Staff should be instructed to ask patients with disabilities if they need help before providing assistance and, if they do, how best they can help....
-
11B-226.4 Baby changing tables
intended use; Parents dealing with a young child's needs are not always mindful of the needs of others, and poorly located baby changing tables that are left in the deployed position can...
-
Visual Alarms
Instead, the final rule only requires that work areas be designed so that compliant visual appliances can be integrated into the alarm system (215.3)....
-
Standards Specific to Assembly Areas
Most of these changes can be found in sections 221 and 802 of the 2010 Standards....
-
4. The Agreements’ Dispute Resolution Mechanism is Burdensome and Unlikely to Afford Complete Relief to Class Members
Settling Defendant can simply contend, without any supporting evidence, that they can not comply with the Agreement....
-
III. Proposed alternative mechanisms to enhance patient access to diagnostic imaging equipment
These alternative means can take many forms, and their specific designs would need to be worked out with appropriate stakeholders to maximize safety, patient handling, and of course, access...