We make beautiful floors, with Mannington's well-known standards for quality built into every product. ...
Search Results "Floor Destination"
Commonly Searched Documents
- Mannington Mills Boucle Collection Commercial Carpet
- Willoughby Industries WAW-2311 AquaWave® Single Station Solid Surface Lavatory System
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
The types of buildings and facilities are: Office buildings and passenger vehicle service stations of three stories or more and 3,000 or more square feet (279 m2) per floor....
-
1007.9 Signage
Each door providing access to an area of refuge from an adjacent floor area shall be identified by a sign stating: AREA OF REFUGE. 2....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
Ground Surfaces
Section 1008.2.6 of the 2010 Standards provides technical requirements for accessible ground surfaces for play areas on accessible routes, clear floor or ground spaces, and turning spaces...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided at check stands and sales and service counters, they shall comply with Section 11B-707.9.1, and shall also comply with Sections 11B-707.2 _|Clear Floor...
-
F205.1 General
Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6. ...
-
1125B.3
Clothes rods shall be a maximum of 54 inches (1372 mm) from the floor for a side approach (See Figure 11B-5D). ...
-
205.1 General
Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6....
-
Visual Busyness (slide 13)
So I think what you have to do is use the contrast on the edges of things to tell you where the edge of the counter is, to tell you where the floor meets the wall, to tell you when something...
-
Study Objectives
Floor space needed for level, highest and lowest height transfers to seats without handhelds, with grab-bars, and with grab bars and a backrest d....
-
New construction and alteration requirements
For example, installing a new display counter, moving walls in a sales area, replacing fixtures, carpet or flooring, and replacing an entry door....
-
224.7 Housing at a place of education
Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms...
-
4.2 Physical Accessibility Barriers and Solutions
and sign in Place sign check-in equipment on a side table or use a clipboard Install a lower countertop or lower a section of the existing counter Facility has two floors...
-
Mounting Height
Mounting Height ADAAG specifies a signal height 80 inches above the highest floor level within the space or 6 inches below the ceiling, whichever is lower....
-
Living Room
High contrast between the seating, floor, and walls....
-
Door and Gate Hardware [§404.2.7]
must: allow one-hand operation not require tight grasping, pinching, or twisting of the wrist operate with 5 lbf maximum be located 34” to 48” above the floor...
- Panda S.90 All Aluminum Slim Profile Multi-Slide Door System
- Panda TS.83 Thermally Broken Multi-Slide Door System
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
- Panda TS.19 Thermally Broken Lift & Slide System
-
Dispersion: ADA Standard Section 233.3.5
Section 233.3.5 covers scoping requirements in the current ADA Standards for dispersion of individual residential dwelling units.