To discuss the maximum base support height, the sub-committee looked at anthropomorphic data regarding footrest heights....
Search Results "Transfer Surface Height"
Commonly Searched Documents
-
Base Support [No specific provisionāaffects M303.2.4]
- Tork ElevationĀ® High Capacity Bath Tissue Roll Dispenser, Black
- Tork ElevationĀ® High Capacity Bath Tissue Roll Dispenser, White
-
Subjects
Subjects The target sample required wheeled mobility device users who lived in the community and were able to transfer independently (with or without a transfer board) and who represent...
-
Counter Slope: ADA Standard Section 406.2
Section 406.2 covers the current ADA Standards for counter slope of adjoining gutters and road surfaces immediately adjacent to curb ramps.
-
Parallel Approach: ADA Standard Section 904.4.1
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
Bathrooms
Some rooms in larger facilities must have a combination roll-in/ transfer shower....
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms Recommendations Description: Entry to wheelchair spaces on raised surfaces greater than ¼ inch in height requires a transition...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
Standard Stall
Different people use different techniques in transferring from a wheelchair to the toilet seat....
-
11B-216.12 Amusement rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces, transfer...
-
11B-411.2.1.1 Location
On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
- Inclusion Solutions Poll Star Voting Booth
- AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
- AJW Architectural Products U716 Series 16"W x 20"H Channel Frame Mirror w/ Mounted Shelf - Plate Glass Surface
-
2.4.1 Current Marketplace Dynamics
and table minimum heights....
-
STORY
[DSA-AC] That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
Polling place violations that can be remediated with temporary measures
Henderson Elementary School, 1800 Dismuke Street, Houston, TX Parking: The surface slope in the designated accessible parking space is not level in all directions and exceeds the...
-
407.12.2 Side Reach (Section-by-Section Analysis)
It proposes to limit the height of the portion of the ICT over which a person must reach to access controls to 34 inches maximum in height....
- 309.3 Baby Changing Table Pull Down Handle Height
- Cybex Total Access Recumbent Bike
- Biodex BioStepĀ® 2 Semi-Recumbent Elliptical Machine