that buildings, structures and related facilities are accessible to, and functional for, people with disabilities to, through, and within public accommodations, without loss of function, space...
Search Results "Space Allowance"
Filters
Commonly Searched Documents
-
CASI California Survey Reports Acceptance Criteria - Construction and Manufacturing Tolerances AC 02-12
-
4.2 Stretchers
With these essential features competing for the same vertical space, current stretchers cannot lower to the desired minimum height of 17" to 19" (see Sections 5 and 6)....
-
Required Compliance [§206.6]
LULAs also are allowed as an alternative to platform lifts and private residence elevators....
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
F206.7.9 Team or Player Seating
While the use of platform lifts is allowed, ramps are recommended to provide access to player seating areas serving an area of sport activity....
-
§382.85(b)
(b) On flights where advance seat assignments are not offered, you must provide seating accommodations under this section by allowing passengers to board the aircraft before other passengers...
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings. ...
-
206.7.9 Team or Player Seating
While the use of platform lifts is allowed, ramps are recommended to provide access to player seating areas serving an area of sport activity....
-
704.2.3 Combustible projections
Exception: Type V construction shall be allowed for R-3 occupancies, as applicable in Section 101.2....
-
g-ii
., lever, pull, push, panic bar) usable with one hand, without tight grasping, pinching, or twisting of the wrist, to allow people who may not be able to easily use one or both hands to...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
§ 36.505 Attorneys fees.
In any action or administrative proceeding commenced pursuant to the Act or this part, the court or agency, in its discretion, may allow the prevailing party, other than the United States...
-
4.15.3 SPOUT LOCATION
The spout shall provide a flow of water at least 4 in (100 mm) high so as to allow the insertion of a cup or glass under the flow of water....
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings....
-
1.1.3
In the ideal case, planning for a 4% running slope allows for construction inaccuracies while still not exceeding the maximum 1:20 slope for walking surfaces....
-
General: ADA Standard Section 306.2.1
Section 306.2.1 of the ADA Standards covers information in the current ADA Standards for toe clearance.
-
11B-802.5 Semi-ambulant seats
Semi-ambulant seats shall provide at least 24 inches (610 mm) clear leg space between the front of the seat to the nearest obstruction or to the back of the seat immediately in front....
-
A) Accessible Parking
Accessible Parking Spaces for Cars Accessible parking spaces for cars have at least a 60 inch-wide access aisle located adjacent to the designated parking space....
-
Grab bar clearance
ANSI 117.1 allows it in 609.3 (2)....
-
704.4 TTYs
Where an acoustic coupler is used, the telephone cord shall be sufficiently long to allow connection of the TTY and the telephone receiver. Advisory 704.4 TTYs....
-
704.4 TTYs
Where an acoustic coupler is used, the telephone cord shall be sufficiently long to allow connection of the TTY and the telephone receiver. Advisory 704.4 TTYs....
-
Alterations/ Historic Preservation
Steeper slopes are allowed for short ramps where a 1:12 slope is not technically feasible....