If seating for people in wheelchairs is provided at tables, counters, and work surfaces, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided...
Search Results "Table Height"
-
4.32.3 KNEE CLEARANCES
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
An accessible examination room has features that make it possible for patients with mobility disabilities, including those who use wheelchairs, to receive appropriate medical care....
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4. Exception: Dining surfaces and work surfaces that are used primarily by...
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4. EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4. Exception: Dining surfaces and work surfaces that are used primarily by...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4. Exception: Dining surfaces and work surfaces that are used primarily by...
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
902.4 Dining Surfaces and Work Surfaces for Children's Use. Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4. EXCEPTION: Dining surfaces and...
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
Accessible dining surfaces and work surfaces for children's use shall comply with 902.4. EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years...
-
3.3.5 Seat Height
Comparisons of research findings on the seat heights for power chairs and scooters showed that mean seat heights measured in the UDI study were comparable to seat heights for the power chairs...
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character. ...
-
11B-703.8.9 Height above floor
11B-703.8.9 Height above floor. Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Seat Height [4.16.3]
Seat Height [4.16.3] Height preferences vary among people with disabilities....
-
5.4.3 Transfer Support Height for M301 and M302
The purpose of a minimum height is to ensure that the gripping surface is at an adequate height to facilitate positioning during a transfer....
-
4.16.3* Height
The height of water closets shall be 17 in to 19 in (430 mm to 485 mm), measured to the top of the toilet seat (see Fig. 29(b))....
-
4.16.3* HEIGHT
The height of water closets shall be 17 in to 19 in (430 mm to 485 mm), measured to the top of the toilet seat (see Fig. 29(b))....
-
Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Lumber
Series Overview Model AT Picnic Tables incorporate galvanized steel braces for a stronger A-frame design....
-
Height [4.18.2]
Height [4.18.2] The rim of an accessible urinal must be no higher than 17 inches above the finished floor....
-
Counter Surface Height
Specifications are provided for the counter surface height of check-out aisles, including the height of counter edge protection, which is limited to 2 inches above the counter surface (904.3.2...
-
KirbyBuilt Providence Walk-Thru Picnic Table
finish Recycled plastic black frames Assembly required Hardware included Guaranteed against breakage for 50 years SKU ABM1440 Model Name 8' Table...
-
Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
Series Overview Model AT Picnic Tables incorporate galvanized steel braces for a stronger A-frame design. ...
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Landscape Forms Inc. Olithas Outdoor Tables and Benches
Requires the Premium User plan or above. (Login or upgrade your account!) -
Grab Bar Height
Commenters pointed out the proposed rule was not clear on whether the height of grab bars was to be measured to the top or to the centerline. Response....
