finish Recycled plastic black frames Assembly required Hardware included Guaranteed against breakage for 50 years SKU ABM1440 Model Name 8' Table...
Search Results "Table Height"
Filters
Commonly Searched Documents
-
KirbyBuilt Providence Walk-Thru Picnic Table
-
Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
Series Overview Model AT Picnic Tables incorporate galvanized steel braces for a stronger A-frame design. ...
-
Wood Picnic Table
WOOD PICNIC TABLE Contact Santa Fe NF for construction drawings ETA Editor's Note Wood Picnic Table drawings: Click here to view/download CAD file | Click here...
-
11B-813.2.1.5 Obstructions
When deployed, changing tables shall not obstruct the required width of an accessible route except as allowed by Section 11B-307.2....
-
F226.1 General
but are not limited to, laboratory and work benches, fume hoods, reception counters, teller windows, study carrels, commercial kitchen counters, writing surfaces, and fixed conference tables...
-
Transfer Height
Transfer Height Ride seats designed for transfer must be between 14 and 24 inches above the load and unload area surface....
-
Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Recycled Plastic
The permanent and secure pedestal mount prevents theft and provides a clear area under the table for easier maintenance and clean-up....
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground. EXCEPTION: Visual characters indicating elevator car controls shall not be required to...
-
Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Perforated Steel
The permanent and secure pedestal mount prevents theft and provides a clear area under the table for easier maintenance and clean-up....
-
3. Getting Access to Medical Equipment
In a national survey of people with disabilities or activity limitations, wheelchair users reported the following: 69% had difficulty using exam tables; 60% had difficulty...
-
4.18.2 Height
Urinals shall be stall-type or wall-hung with an elongated rim at a maximum of 17 in (430 mm) above the finish floor.
-
4.18.2 HEIGHT
Urinals shall be stall-type or wall-hung with an elongated rim at a maximum of 17 in (430 mm) above the floor.
-
Diaper Deck Infant Changing Table
"The Diaper DeckTM" Designed to fit into even the smallest of restrooms, the Diaper Decks compact design allows for installation in restrooms stalls if necessary. Horizontal...
-
Bobrick Koala Kare Baby Changing Station Installation Video
This video from the manufacturer shows a Bobrick Koala Kare Baby Changing Table being installed....
-
Pilot Rock T300/T400 Series Round, Pedestal Table With CONTOUR Bench Seats - Using Expanded Steel
The permanent and secure pedestal mount prevents theft and provides a clear area under the table for easier maintenance and clean-up....
-
11B-226.4 Baby changing tables
Baby changing tables shall comply with Sections 11B-309 and 11B-902....
-
Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Cut Steel Plate
The permanent and secure pedestal mount prevents theft and provides a clear area under the table for easier maintenance and clean-up....
-
226.1 General
to procure or adjust work stations such as desks, laboratory and work benches, fume hoods, reception counters, teller windows, study carrels, commercial kitchen counters, and conference tables...
-
Effect of Handhelds on Transfer Height
Participant preference for grab bars and backrest heights for protocols B through E are shown in Table 17. For all protocols the tall grab bars were preferred....
-
Clear Floor and Turning Space Inside Examination Rooms
The exam table must have sufficient clear floor space next to it so that an individual using a wheelchair can approach the side of the table for transfer onto it....
-
EXHIBIT B
EXHIBIT B The average anthropometric dimensions employed shall be: (1) average eye height for a person sitting in a wheelchair is 47.45"; (2) horizontal distance from the eye of an average...
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
[See subsections ...]
