Water closets in accessible stalls shall comply with 4.16.
Search Results "Sleeping Compartment"
Commonly Searched Documents
- 
    
  
  4.17.2 WATER CLOSETS
  
- 
    
  
  4.23.4 WATER CLOSETS
  If toilet stalls are provided, then at least one shall comply with 4.17; its water closet shall comply with 4.16. If water closets are not in stalls, then at least one shall comply... 
- 
    
  
  4.22.4 WATER CLOSETS
  If toilet stalls are provided, then at least one shall comply with 4.17; its water closet shall comply with 4.16. If water closets are not in stalls, then at least one shall comply... 
- 
    
  
  Error/Omission: Toilet rooms with 6 or more toilet stalls lack a 36" wide "ambulatory" toilet stall.
  Error/Omission: Toilet rooms with 6 or more toilet stalls lack a 36" wide "ambulatory" toilet stall. Result: Too few accessible stalls are provided for people with mobility... 
- 
    
  
  1134A.6, Item 1.1
  1.1. The shower stall shall measure at least 42 inches wide by 48 inches deep (1067 mm by 1219 mm) with an entrance opening of at least 36 inches (914 mm); or 
- 
    
  
  1134A.6, Item 1
  1. Size. When one or more shower stalls are provided within the same dwelling units, at least one shower stall shall comply with one of the following requirements. 
- 
    
  
  11B-213.3.6 Bathing facilities
  Where bathtubs or showers are provided, at least one bathtub complying with Section 11B-607 or at least one shower complying with Section 11B-608 shall be provided. Where two or more... 
- 
    
  
  1134A.6 Showers
  Showers required to be accessible shall comply with this section. 
- 
    
  
  1134A.6 Showers
  Showers required to be accessible shall comply with this section. 1. Size. When one or more shower stalls are provided within the same dwelling units, at least one shower stall... 
- 
    
  
  Plumbing Fixtures and Accessories: ADA Standard Section 213.3
  Section 213.3 covers scoping requirements in the current ADA Standards for plumbing fixtures and accessories. 
- 
    
  
  11B-213.3 Plumbing fixtures and accessories
  Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with Section 11B-213.2 shall comply with Section 11B-213.3. Advisory 11B-213.3... 
- 
    
  
  11B-809.10.6.4 Reinforcement for grab bars
  Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm)... 
- 
    
  
  A4.17.5 Doors
  To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near... 
- 
    
  
  A4.17.5 DOORS
  To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near... 
- 
    
  
  B. Accessible Routes To All Service/Activity Areas
  This includes people who use mobility devices, such as wheelchairs and scooters, being able to get to locations where supplies are distributed, to eating areas, to sleeping areas, to toilet... 
- Weizel Security 826-S74 SR™ Partition Door
- 
    
  
  Clear floor space beside or between beds must be 36" wide
  Remember that because the clear floor space required by 806.2.3 will be deeper than 24" to end up beside or between the beds where it will be usable, it will be in an alcove that is... 
- 
    
  
  Dimensions for Adults and Children: ADA Standard Section 102
  Section 102 of the ADA Standards covers information on the dimensions for adults and children. 
- 
    
  
  11B-102 Dimensions for adults and children
  In addition, this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks... 
- Figure 604.8.1.4 Wheelchair Accessible Toilet Compartment Toe Clearance – Drawing from the U.S. Access Board
- Bobrick Accessibility Video -- Design for Turning Radiuses
- 
    
  
  11B-805.2.3 Turning space
  Turning space complying with Section 11B-304 shall be provided within the room. 
- 
    
  
  805.2 Turning Space
  Turning space complying with 304 shall be provided within the room. 
- 
    
  
  805.2 Turning Space
  Turning space complying with 304 shall be provided within the room. 
