Toilet/ bathing rooms which are part of patient bedrooms added or altered and required to be accessible shall comply with Section 11B-805.2.4. ...
Search Results "Patient Change Area"
Commonly Searched Documents
-
11B-223.1.1.3 Toilet and bathing facilities
-
11B-223.1.1.3 Toilet and bathing facilities
Toilet/ bathing rooms which are part of patient bedrooms added or altered and required to be accessible shall comply with Section 11B-805.2.4....
-
11B-223.1.1.3 Toilet and bathing facilities
Toilet/bathing rooms which are part of patient bedrooms added or altered and required to be accessible shall comply with Section 11B-805.2.4....
- Integralift Fixed Ceiling Lift Short Instructional Video
- Hill-Rom Likorall™ Overhead Lift, Traverse with Pendants
- GH1 Ceiling Lift 3D Demonstration
- Integralift Fixed Ceiling Lift Full Length Instructional Video
- Hill-Rom Likorall™ Overhead Lift, Traverse with Upright Supports
- Hill-Rom Likorall™ Overhead Lift, Straight Rail with Curve
- Guldmann Ceiling Hoist GH1 F: Installation of the hoist
-
Adjustable Height Range Considered
Patient support surfaces can be adjusted outside this range when not needed for patient transfer such as when performing diagnostic procedures....
- 902.3 Baby Changing Table Work Surface Height
-
Assembly Areas [4.33]
Assembly Areas [4.33] ADAAG requirements for assembly areas apply to areas where groups of people gather for recreational, educational, political, social, or amusement purposes or for...
-
5.4.1.1 Transfer Support Location Recommendation for Stretchers
Rationale for the recommendation Patients access stretchers on either of the long sides rather than on its end (short side)....
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
5.4.2.1 Transfer Support Length Recommendation for Stretchers
5.4.2.1 Transfer Support Length Recommendation for Stretchers On Stretchers, the transfer surface is oriented along the long dimension of the surface on which patients are positioned...
-
5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position
5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position....
-
1. Transfer Surface
[See subsections ...]
-
Transfer Supports (M301.3.1, M302.3.1, and M305.2)
M301.3.1 and M302.3.1 would require transfer supports to be provided for use with the transfer sides. M305.2.1 would require the transfer supports to be located within reach of the...
-
Floor or Ground Surfaces: ADA Standard Section 304.2
Section 304.2 covers the current ADA Standards for the ground surfaces of a turning space.
-
Facilities Specializing in Treating Conditions That Affect Mobility: ADA Standard Section 223.2.2
Section 223.2.2 covers scoping requirements in the current ADA Standards for facilities specializing in treating conditions that affect mobility.
-
11B-304.2 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved. Advisory 11B-304.2 Floor or ground surface Exception....
-
3. Lift Compatibility Exception
The MDE NPRM proposed that diagnostic equipment used by patients in the supine, prone or side-lying position and diagnostic equipment used by patients in the seated position be usable with...
-
General
General Because many patients in a medical care facility may experience reduced mobility during their stay, at least 10% of patient bedrooms and in-room bathrooms must be fully accessible...