Floor surfaces in elevator cars shall comply with Section 11B-302 and 11B-303....
Search Results "Ground Floor"
-
11B-407.4.2 Floor surfaces
-
11B-407.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Section 11B-302 and 11B-303....
-
Figure 305.5 Position of Clear Floor or Ground Space – Drawing from the U.S. Access Board
-
11B-810.3 Bus shelters
Bus shelters shall provide a minimum clear floor or ground space complying with Section 11B-305 entirely within the shelter....
-
11B-810.3 Bus shelters
Bus shelters shall provide a minimum clear floor or ground space complying with Section 11B-305 entirely within the shelter....
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
Patented "no-bump" configuration ADA compliant Gasketed to eliminate transition rattle Standard load capabilities Recessed frame accommodates many floor...
-
4.4.4 Clear Floor or Ground Space
A clear floor or ground space of 36 inches (915 mm) by 48 inches (1220 mm) shall be located at an end the bench with one side of the space adjoining an accessible route, outdoor recreation...
-
4.2.6 Clear Floor or Ground Space
At least 48 inches (1220 mm) by 48 inches (1220 mm) of clear floor or ground space shall be provided on all usable sides of fire rings, grills, fireplaces or woodstoves....
-
1(1)(a) Separate ground floor unit entrances
(a) Separate ground floor unit entrances....
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
cover plate for added slip resistance Integral, high durometer seal deters water from entering the system and acts as a noise dampening device Key Specifications Floor...
-
Ground Level and Elevated Play Components: ADA Standard Section 1008.2.1
Accessible routes serving ground level play components and elevated play components shall be permitted to use the exceptions in 1008.2.1. EXCEPTIONS: 1....
-
4.2.7 Surface
The surface of the clear floor or ground space shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
4.1.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface slope, size, or location, the...
-
Teeing Grounds: ADA Standard Section 238.2.1
Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
-
Golf Club Reach Range Area: ADA Standard Section 1007.3.2
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
4.3.6 Surface Textures
The surface of an accessible route shall comply with 4.5.
-
4.3.6 SURFACE TEXTURES
The surface of an accessible route shall comply with 4.5.
-
Platform and Vehicle Floor Coordination: ADA Standard Section 810.5.3
Advisory 810.5.3 Platform and Vehicle Floor Coordination....
-
4.5.2 Clear Floor or Ground Space
A clear floor or ground space shall be provided for each trash, recycling, and other essential container....
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
-
3.4.4 Clear Ground Space and Turning Space
Each viewing area that is required to be accessible by section 3.4.1 shall have a clear ground or floor space 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum positioned for either...
