Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
Search Results "Ground Floor"
Filters
Commonly Searched Documents
-
Teeing Grounds: ADA Standard Section 238.2.1
-
4.2.7 Surface
The surface of the clear floor or ground space shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
4.5.2 Clear Floor or Ground Space
A clear floor or ground space shall be provided for each trash, recycling, and other essential container....
-
4.1.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface slope, size, or location, the...
-
Golf Club Reach Range Area: ADA Standard Section 1007.3.2
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
-
3.4.4 Clear Ground Space and Turning Space
Each viewing area that is required to be accessible by section 3.4.1 shall have a clear ground or floor space 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum positioned for either...
-
11B-240.2.1 Ground level play components
Ground level play components shall be provided in the number and types required by Section 11B-240.2.1....
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
The 101 Series is adaptable to many flooring finishes, including ceramic tile, marble, stone, vinyl, tile and carpet....
-
4.3.6 Surface Textures
The surface of an accessible route shall comply with 4.5.
-
4.3.6 SURFACE TEXTURES
The surface of an accessible route shall comply with 4.5.
-
Platform and Vehicle Floor Coordination: ADA Standard Section 810.5.3
Advisory 810.5.3 Platform and Vehicle Floor Coordination....
-
Clear Floor Space [4.2.4]
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support....
-
Surface and Size [§305.2 and §305.3]
Surface and Size [§305.2 and §305.3] Clear floor spaces must meet requirements for ground and floor surfaces, including criteria for firmness, stability, and slip resistance....
-
11B-233.3.1.2.2 Non-elevator buildings
Ground floor residential dwelling units in non-elevator buildings shall be adaptable....
-
11B-233.3.1.2.2 Non-elevator buildings
Ground floor residential dwelling units in non-elevator buildings shall be adaptable....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
counter-sunk holes for easy installation Applicable for existing conditions, additions and new construction Anti-slip surface serrations Key Specifications Floor...
-
Figure 305.5 Position of Clear Floor or Ground Space – Drawing from the U.S. Access Board
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
Patented "no-bump" configuration ADA compliant Gasketed to eliminate transition rattle Standard load capabilities Recessed frame accommodates many floor...
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
cover plate for added slip resistance Integral, high durometer seal deters water from entering the system and acts as a noise dampening device Key Specifications Floor...
-
Teeing Grounds
Teeing Grounds The "teeing ground" is the starting place for a hole of golf....
-
11B-238.2.1 Teeing grounds
Where one teeing ground is provided for a hole, the teeing ground shall be designed and constructed so that a golf car can enter and exit the teeing ground....
-
4.6.7 Openings
Openings in the clear floor or ground space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter....
