On-grade walks or paths between separate buildings with covered multifamily dwellings, while not required, should be accessible unless the slope of finish grade exceeds 8.33% at any point...
Search Results "Finished Grade"
Filters
Commonly Searched Documents
-
1. Accessible route(s)
-
11B-233.3.1.2.6.2 Test number one, individual building test
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15,240 mm) of the planned entrance also exceed 15 percent...
-
Scenario 4 – Appropriate Testing
Juan is a student in the third grade. His teacher tests reading comprehension with written in-class quizzes....
-
Access Board: Signs
-
BLENDED TRANSITION
[DSA-AC] A raised pedestrian crossing, depressed corner or similar connection that has a grade of 5 percent or less a circulation path at the level of the sidewalk or walk and the level...
-
Existing elevator cab size
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
Just Manufacturing Commercial Grade Single-Handle Pre-Rinse Kitchen Faucet
Polished Chrome Lead Free Compliant Single-Handle Pre-Rinse kitchen Faucet with Spring and Swivel Magnetic Spout. Deck mount Pre-Rinse Single Handle Cast...
-
General: ADA Standard Section 306.2.1
Section 306.2.1 of the ADA Standards covers information in the current ADA Standards for toe clearance.
-
Single Occupant Structures: ADA Standard Section 203.6
Section 203.6 covers scoping requirements of general exceptions for single occupant structures in the most current ADA Standards.
-
Elevated Play Component
A play component that is approached above or below grade and that is part of a composite play structure consisting of two or more play components attached or functionally linked to create...
-
11B-203.6 Single occupant structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
ELEVATED PLAY COMPONENT
[DSA-AC] A play component that is approached above or below grade and that is part of a composite play structure consisting of two or more play components attached or functionally linked...
-
Press Boxes: ADA Standard Section 206.2.7
Section 206.2.7 covers scoping requirements in the most current ADA Standards for accessible routes to press boxes.
-
11B-206.2.7 Press boxes
An accessible route shall not be required to free-standing press boxes that are elevated above grade 12 feet (3660 mm) minimum provided that the aggregate area of all press boxes is 500...
-
R302.5.5 Regulatory Constraints
The AASHTO Guide recommends that the grade of a shared use path should not exceed 5 percent; but, where the path is adjacent to a roadway with a grade that exceeds 5 percent, the grade of...
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
Slope: ADA Standard Section 810.5.1
Where platforms serve vehicles operating on existing track or track laid in existing roadway, the slope of the platform parallel to the track shall be permitted to be equal to the slope (grade...
-
11B-810.5.1 Slope
Where platforms serve vehicles operating on existing track or track laid in existing roadway, the slope of the platform parallel to the track shall be permitted to be equal to the slope (grade...
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
The maximum grade of a shared use path adjacent to a roadway should be 5 percent, but the grade should generally match the grade of the adjacent roadway....
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
A6.) Methods of measurement are critical in determining both compliance and allowable tolerances. The industry’s standards are usually very clear about how to make their...
-
11B-233.3.1.2.6.3 Test number two, site analysis test
Calculate the percentage of the total buildable area of the undisturbed site with a natural grade less than 10 percent slope....
-
1013.4 Raised character and braille exit signs
Each grade-level exterior exit door that is required to comply with Section 1013.1 shall be identified by a tactile exit sign with the word, “EXIT.” 2....
