Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"

• Federal Documents > Regulations > 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (1991 ADA Title III Regulations)
  Sec.36.401(c) Exception for structural impracticability

  (c) Exception for structural impracticability....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  Chapter R3: Technical Requirements (Section-by-Section Analysis)

  Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...

• Federal Documents > Preamble to Guidelines > 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas - Preamble
  1015.1 General

  This section contains the technical requirements for viewing areas....

• Federal Documents > Technical Assistance > Title III Technical Assistance Manual (with 1994 supplement)
  III-7.3120 Temporary structures

  III−7.3120 Temporary structures (ADAAG §4.1.1(4)). Temporary buildings that are extensively used or are essential for public use are covered....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-610.4 Structural strength

  11B-610.4 Structural strength....

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Single Occupant Structures (§203.6)

  Single Occupant Structures (§203.6) Single occupant structures accessed only by below-grade passageways or elevated above standard curb height Examples: toll booths that are accessed...

• Rulemaking Process Documents > NPRMS > 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities NPRM: Preamble (2008 Title III NPRM Preamble)
  Maximum side reach ranges. (Section-by-Section Analysis)

  The 2004 ADAAG includes a change in the maximum height of a side reach range from 54 inches in the current ADA Standards, to 48 inches in the 2004 ADAAG. ...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.1.1(5)(a)

  (a) In new construction, a person or entity is not required to meet fully the requirements of these guidelines where that person or entity can demonstrate that it is structurally impracticable...

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.26.3 STRUCTURAL STRENGTH

  the maximum bending moment from the application of 250 lbf (1112N) shall be less than the allowable stress for the material of the grab bar or seat...

• Federal Documents > Technical Assistance > Title I Technical Assistance Manual
  SEC. 506. TECHNICAL ASSISTANCE. 42 USC 12206

  TECHNICAL ASSISTANCE. 42 USC 12206....

• Federal Documents > Regulations > 34 CFR Part 104 - Nondiscrimination on the Basis of Handicap in Programs or Activities Receiving Federal Financial Assistance (with amendments issued through July 2017)
  §104.23(c)(3)

  (3) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.1.1(4) Temporary Structures

  (4) Temporary Structures. These guidelines cover temporary buildings or facilities as well as permanent facilities....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-213.2 Toilet rooms and bathing rooms

  In alterations where it is technically infeasible to comply with Section 11B-603, altering existing toilet or bathing rooms shall not be required where a single unisex (single-user or family...

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-213.2 Toilet rooms and bathing rooms

  In alterations where it is technically infeasible to comply with Section 11B-603, altering existing toilet or bathing rooms shall not be required where a single unisex (single-user or family...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-610.4 Structural strength

  stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-610.4 Structural strength

  stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM - Preamble
  Chapter M3 Technical Criteria

  The technical criteria specify measurements in inches and millimeters....

• Federal Documents > Technical Assistance > Guidance on the 2010 ADA Standards for Accessible Design
  State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151

  has added a new section, designated as Sec. 35.151(a)(2), to provide that full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally...

• Federal Documents > Technical Assistance > ADAAG Manual
  Purpose, General, Miscellaneous Instructions, and Minimum Requirements

  ADAAG provides both scoping and technical requirements. Scoping provisions in 4.1 spell out which spaces and elements must meet the technical criteria in sections 4.2 through 4.35....

• Federal Documents > Standards > 2010 ADA Standards
  Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2

  Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.

• Federal Documents > Technical Assistance > Outdoor Developed Areas: A Summary of Accessibility Standards for Federal Outdoor Developed Areas
  Technical Requirements Applicable to Specific Features

  [See subsections ...]

• Federal Documents > Standards > 2010 ADA Standards
  Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1

  Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.11 Transfer Support Structural Strength for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position

  5.4.11 Transfer Support Structural Strength for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....

• Federal Documents > Regulations > 28 CFR Part 35 Nondiscrimination on the Basis of Disability in State and Local Government Services (2010 ADA Title II Regulations with amendments issued through Aug. 2016)
  § 35.151(a)(2) Exception for structural impracticability

  (2) Exception for structural impracticability....