The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
Search Results "Work Surface"
-
11B-1009.2.4 Seat
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
City of Bend Oregon Curb Ramp Commitment
Requires the Registered User plan or above. Login!
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
RV Parking Spaces Within Camping Units With Mobility Features and RV Pull-Up Spaces at Dump Stations [F244.2.3.2.1 and F244.4]
RV parking spaces within camping units with mobility features and RV pull-up spaces at dump stations must comply with the technical requirements for width, surface, and slope of RV spaces...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
A4.17.5 Doors
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
R405.3.1 General
Space under an element between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface shall be considered knee clearance and shall comply with R405.3....
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
A4.17.5 DOORS
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
705.2 Platform Edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
What happens after I file a charge with the EEOC?
For more information about work support, contact the Social Security Administration at: 1-800-772-1213 (voice) 1-800-325-0778 (TTY www.ssa.gov/work For more information about the...
-
Accessibility Engineering Specialists
As a result of work by several Committee members, such a group has already been created....
-
Public Address Systems and Microphones
Recommendations: Both systems can share sound sources (microphones, mixers, tape players, VCRs) but not all microphones of a public address system work well with ALSs....
-
Step 1: Determine the Applicability of FSTAG
Does the work meet the definitions for new construction or alteration? Definitions are in "Understanding Trail Terminology" of this guidebook. If yes, 2....
-
Ensuring Online Files and Documents are Accessible
WAI is an international community of member organizations, staff, and individuals who work to promote accessibility, and issues guidance and technical tools to help improve accessibility...
-
7.4 Nondiscrimination and Relationship or Association with an Individual with a Disability
The employer may not assume that the individual will be unreliable, have to use leave time, or be away from work in order to care for the family member with a disability; refuse...
-
About the Authors
She began her Forest Service career in 1991 and has worked in the field of accessibility for more than two decades....
-
24. Is it a reasonable accommodation to modify a workplace policy?
might have to modify a policy to allow an employee with a disability to bring in a small refrigerator, or to use the employer's refrigerator, to store medication that must be taken during working...
-
"Service Animal" (Section-by-Section Analysis)
The current definition of "service animal" in § 36.104 is, "any guide dog, signal dog, or other animal individually trained to do work or perform tasks for the benefit of an individual with...
