Style Number: 816 Description: For poured concrete stairs Maximum length: 8' 0" in Alumacast and Feracast 3" wide for steps up to 10" deep Thickness: 5/16...
Search Results "Maximum Extent Practicable"
-
American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
-
BEA Inc. EMR475 Series Door Access 4.75" Round Panther Plate (Push to Open)
entire surface area of the push plate Stainless steel finish is resistant to scratches & scuffing as well as rust Text and logo are abrasive etched onto the surface for maximum...
-
BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
entire surface area of the push plate Stainless steel finish is resistant to scratches & scuffing as well as rust Text and logo are abrasive etched onto the surface for maximum...
-
HEWI System Lignum Protect Handrails
They withstand maximum use and exposure, and are dimensionally stable....
-
Section 1630.1(c) Construction
Accordingly, under the ADA as amended and the EEOC's regulations, the definition of “disability” “shall be construed in favor of broad coverage of individuals under [the ADA], to the maximum...
-
Door King Inc. 9100 Slide Gate Operator Residential & Commercial
Specifications: Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. ...
-
Federal Elevator Serenus LULA Elevator
Plastic laminate ceiling with 4 potlights Stainless steel control panel and trim Automatic 2 speed doors (36″ X 80″ OR 36″ X 84″ Prime Coat) 30 fpm. (0.15 m/s) maximum...
-
Door King Inc. 1150 Overhead Gate and Door opener
Specifications: Maximum gate height up to 14-feet*. (*Dependant on the rail assembly ordered). Maximum gate width 25-feet*. ...
-
Wagner Instruments Mark-10 M4 Digital Force Gauge
Analysis Accuracy: ± 0.2% of Full Scale Features Large graphic liquid crystal display of: Primary force reading - 6 digit Peak force readings - maximum...
-
Door King Inc. 6004 Column Mount Swing Gate Operator
Exit and Reverse plug-in loop detectors 90° in approximately 12 seconds Gate overlap feature for dual gate operation Magnetic lock power circuit Built-in reset and test buttons Maximum...
-
229 Windows
Commenters generally supported this provision but some commenters asked whether the maximum five-pounds (5 lbs.) of force requirement of section 309 applies to the window latch itself or...
-
11B-303.5 Warning curbs
A warning curb is not required when a guard or handrail is provided with a guide rail centered 2 inches (51 mm) minimum and 4 inches (102 mm) maximum above the surface of the walk or sidewalk...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
Parallel Grab Bars
With respect to the lower grab bar at bathtubs, the specified mounting height has been changed to a range of 8 inches minimum to 10 inches maximum above the rim of the bathtub....
-
Pushbutton locator tone
The 2003 MUTCD requires that locator tone volume be carefully adjusted to be audible a minimum of 1.8 m (6 feet) and a maximum of 3.7 m (12 feet) from the pushbutton, or to the building...
-
M303.4.1 Breast Platform Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a mammography breast platform height range of 30 inches high minimum and 42 inches high maximum above the floor....
-
608.3.2 Standard Roll-In Type Shower Compartments
Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
410.6 Doors and Gates
EXCEPTION: Platform lifts serving two landings maximum and having doors or gates on opposite sides shall be permitted to have self-closing manual doors or gates....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
R304.5.3 Cross Slope
The cross slope of curb ramps, blended transitions, and turning spaces shall be 2 percent maximum....
-
Cross Slope and Surfaces [4.8.6]
The cross slope (2% maximum) must be minimized because it makes wheelchair travel difficult by distributing more weight and required force to one side and causing front casters to veer....
