The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
Search Results "Elevator Car Designation"
Filters
Commonly Searched Documents
-
11B-1009.2.4 Seat
-
GSA Section 508 Tutorials, Guidance, Checklists
GSA staff are required to comply with the provisions of Section 508 and ensure accessibility of online electronic content, including but not limited to websites, web applications,...
-
Tile Tech Pavers® Porcelain Pavers™ Series
Load Bearing Porcelain Pavers are comprised of a 20mm single layer of load-bearing porcelain designed for use in conjunction with raised pedestals and deck support systems as well as other...
-
Error/Omission: The built-up curb ramp projects into the access aisle.
Result: When an access aisle has a sloped surface, a wheelchair may roll away from a car or van preventing the wheelchair user from getting out of the vehicle....
-
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems
will consider, in a case-by-case basis, how the good faith efforts requirement would apply in the case of an agreement between rail carriers to permit quick-response, short-term leases of cars...
-
Minimum Number: ADA Standard Section 234.4.2
Section 234.4.2 covers the most current ADA scoping requirements for the minimum number of wheelchairs spaces, transfer seats or devices at existing amusement rides.
-
TABLE OF CONTENTS
Physical Accessibility of Polling Places Getting Started Parking Passenger Drop-off Locations Accessible Routes Ramps Protruding Objects Building Entrance Lifts and Elevators...
-
STEP 2
STEP 2 Determining what is needed based on Table 240.2.1.2: Table 240.2.1.2 Number of elevated play components provided Minimum number of ground-level play components...
-
Accessible Route
Interior accessible routes may include corridors, floors, ramps, elevators, lifts, and clear floor space at fixtures....
-
III. FACILITIES COVERED BY THIS CONSENT DECREE
related facilities, including, but not limited to, the public entrances to the Hotel, the guest registration desk, the lobby, the public telephones, the public and employee restrooms, the elevators...
-
Site Constraints
Platform lifts are permitted where "existing or other constraints" make ramp or elevator access "infeasible."...
-
Garaventa Evacu-Trac CD7 Evacuation Chair
During an emergency even most elevators are disabled (for safety reasons)....
-
PEMKO 2" to 48" Aluminum Plates No. 18/1
Elevated plates require support every 4undefined on center, at welded seams, and as necessary for support....
-
SUPPLEMENTARY INFORMATION:
The performance standard requires that passenger railroads ensure that passengers with disabilities can get on and off any accessible car that is available to passengers at a station platform...
-
Getting From Here to There—Outdoor Recreation Access Routes
Section 1.2 of FSORAG defines an outdoor recreation access route as "a continuous, unobstructed path designed for pedestrian use that connects constructed features in a campground, camping...
-
18(a)
(a) Hotel owners seeking to construct a Newly Constructed Hotel must, prior to the start of construction, submit to the HWI ADA Compliance Officer (designated pursuant to Paragraph 27) a...
-
Bobrick SureFlo® Automatic, Top Fill Bulk Foam Soap Dispenser B-828 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!) -
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
Pilot Rock M-32/17 Campfire Ring
This fire ring design allows the grate to be adjusted one side at a time, using only one hand; without tight grasping, pinching or twisting of the wrist; and does not exceed 10 lbs. to lift...
-
1.1.1 Measurement tools
Angular or slope measuring devices should be capable of measuring to a precision of 0.1 degree and elevation measuring devices should be capable of measuring to a precision of 0.01 ft (1...
-
4.3.8 Changes in Levels
If an accessible route has changes in level greater than 1/2 in (13 mm), then a curb ramp, ramp, elevator, or platform lift (as permitted in 4.1.3 and 4.1.6) shall be provided that complies...
