Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms have privacy equivalent to that afforded other users of the facility....
Search Results "Door Opening Angle"
Filters
Commonly Searched Documents
-
803.1 General
-
803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
803.1 General
Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility....
-
Accessible Routes
accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors...
-
Accessible Routes
Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
D. Entering the Emergency Shelter
An accessible entrance must provide at least one accessible door with maneuvering space, accessible hardware, and enough clear width to allow people who use crutches, a cane, walker, scooter...
-
9.3.1 General
Visual notification devices shall also be provided in units, sleeping rooms and suites to alert room occupants of incoming telephone calls and a door knock or bell....
-
4.10.13* Car Position Indicators
In elevator cars, a visual car position indicator shall be provided above the car control panel or over the door to show the position of the elevator in the hoistway....
-
4.10.13* CAR POSITION INDICATORS
In elevator cars, a visual car position indicator shall be provided above the car control panel or over the door to show the position of the elevator in the hoistway....
-
16(a)(iv)
ADA Standards §§ 9.1.2 and 9.1.3, that provide visual alarms that are connected to the building emergency alarm system, and visual notification devices for incoming telephone calls, and door...
-
2. Pick Up and Drop Off Locations with Multiple Entrances
A paratransit rider's request to be picked up at home, but not at the front door of his or her home, should be granted, as long as the requested pick-up location does not pose a direct threat...
-
Error/Omission: Food service queuing areas are too narrow and do not provide adequate clear width for turns.
The minimum clear width of an accessible route shall be 36 in (915 mm) except at doors (see 4.13.5 and 4.13.6)....
-
2. Pick Up and Drop Off Locations with Multiple Entrances
A paratransit rider's request to be picked up at home, but not at the front door of his or her home, should be granted, as long as the requested pick-up location does not pose a direct threat...
-
11B-213.3.1 Toilet compartments
Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment. ◼...
-
AJW Architectural Products U526 Series U526-10 Sanitary Napkin/Tampon Dispenser - 10 cent Operation - Recessed
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Holds 30 Sanitary Napkin and 27 Tampon Packages Multiple coinage options available Product Specs Door...
-
Pilot Rock WUT and WUTH Picnic Table Using Recycled Plastic
Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. ...
-
Pilot Rock WUT and WUTH Picnic Table Using Formed Steel Channel
Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. ...
-
Pilot Rock XT and XTH Series End Accessible Picnic Table Using Aluminum
Top/seat mounting angles are 2" x 2" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. ...
-
Pilot Rock WXT and WXTH Picnic Table Using Lumber
Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. ...
-
Pilot Rock UT and UTH Series End Accessible Picnic Table Using Steel Tops Seats
Top/seat mounting angles are 2" x 2" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. ...
-
Pilot Rock XT and XTH Series End Accessible Picnic Table - Using Steel Tops and Seats
Top/seat mounting angles are 2" x 2" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. ...
-
Pilot Rock WXT and WXTH Picnic Table Using Expanded Steel
Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. ...
-
Pilot Rock WUT and WUTH Picnic Table Using Lumber
Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. ...
