[2010 ADA Standards] 405.9.1 Extended Floor or Ground Surface....
Search Results "NFSI: National Floor Safety Institute"
-
11B-405.9.1 Reserved.
-
Rectech
The Rehabilitation Engineering Research Center on Recreational Technologies (RERC Rec-Tech) at University of Alabama-Birmingham is a five-year grant funded by the National Institute on Disability...
-
The Rehabilitation Engineering Research Center on Recreational Technologies (RERC Rec-Tech)
The Rehabilitation Engineering Research Center on Recreational Technologies (RERC Rec-Tech) at University of Alabama-Birmingham is a five-year grant funded by the National Institute on Disability...
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...
-
Section 1.0 Background
In response to this lack of current information, the IDeA Center, with funding from the National Institute on Disability and Rehabilitation Research, developed a new set of anthropometric...
-
3.9 The Undue Hardship Limitation
For example: A local, independently owned fast food franchise of a national company that receives no funding from that company may assert that it would be an undue hardship to provide an...
-
Heidi Myhre - The ADA helps me
Requires the Registered User plan or above. Login! -
Heidi Myhre - The ADA helps all
Requires the Registered User plan or above. Login!
-
Nathan Perry - The ADA and the elderly
Requires the Registered User plan or above. Login!
-
Carol Ely on the ADA and Physical Access
Requires the Registered User plan or above. Login!
-
1118B.4
One full unobstructed side of the clear floor or ground space for a wheelchair shall adjoin or overlap an accessible route or adjoin another wheelchair clear floor space....
-
217.4.2.1 Public Buildings
Where at least one public pay telephone is provided on a floor of a public building, at least one public TTY shall be provided on that floor....
-
217.4.2.2 Private Buildings
Where four or more public pay telephones are provided on a floor of a private building, at least one public TTY shall be provided on that floor....
-
I. Introduction to the Study
Introduction to the Study Purpose In 2008, the National Center on Accessibility (NCA) at Indiana University initiated a longitudinal study of playground surfaces with research funding...
-
Overhead Lifts
Overhead lifts and portable floor lifts are used in health care facilities, and the technical criteria should not be viewed as preferring portable floor lifts....
-
Notes
Board on Health Sciences Policy, Institute of Medicine of the National Academies, The National Academies Press: Washington DC, 2006, pp. 185–193. Kemp, B.J., & Mosqueda, L....
-
ILRU
It is a program of TIRR Memorial Hermann, a nationally recognized medical rehabilitation facility for persons with disabilities....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-604.7.2 Disposal units
The disposal unit shall be located below the grab bar with the opening of the disposal unit 19 inches minimum (483 mm) above the finish floor....
-
11B-407.2.2.1 Visible and audible signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. Exceptions: Reserved. Reserved....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-407.2.2.1 Visible and audible signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. Exceptions: Reserved. Reserved....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
