[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
Search Results "Floor Destination Indicator"
-
412.3.5 Accessibility
-
1133A.5 Lower shelving
Lower shelving and/or drawer space shall be provided in the kitchen at a height of no more than 48 inches (1219 mm) above the floor....
-
306.2.3 Minimum Required Depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (430 mm) minimum under the element....
-
4.1.3(10)(b)
(b) Where more than one drinking fountain or water cooler is provided on a floor, 50% of those provided shall comply with 4.15 and shall be on an accessible route....
-
4.28.3(6)
(6) The appliance shall be placed 80 in (2030 mm) above the highest floor level within the space or 6 in (152 mm) below the ceiling, whichever is lower....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
412.3.8 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
407.4.6.2 Buttons
Car control buttons with floor designations shall comply with 407.4.6.2 and shall be raised or flush. EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
- Willoughby Industries US-HC Cabinet Shower
- Neo-Metro Euro-Urban Toilet Configured for In-Wall Flushing System
- Rockwood Manufacturing Company 84 Push Plate - .050" Thick 10" x 20" Plate
- Delta Widespread Lavatory Faucet 3552-MPU-DST
- Delta Proximity Gooseneck HW-BB Recessed Box Trim Set SS 620TP3321TR-BB-SS
- Delta Single Handle Centerset Lavatory Faucet 515LF-HDF
- Delta Single Hole Faucet with Proximity™ Sensing Technology Hardwired 590-PLGHDFHW
- Delta Proximity Gooseneck HW-BB Recessed Box Trim Set SS 620TP3321TR-SS
-
Manual vs. Power (RMS Values)
This could indicate that the size of gaps in surfaces may be more important than the frequency of the gaps....
-
Background
In this report, the term SEWF refers to ìstabilizedî EWF and indicates the system with the bonded top layer of EWF....