Section 213.3.1 of the 2010 Standards requires multi-user men’s toilet rooms, where the total of toilet compartments and urinals is six or more, to contain at least one ambulatory accessible...
Search Results "FTDS: Federal Trail Data Standards"
-
Ambulatory Accessible Toilet Compartments
-
Toilet Stalls [4.17]
Toilet Stalls [4.17] The standard stall in section 4.17 is wheelchair accessible....
-
§40.6 Records.
agency's file on each contract, grant, or loan involving the design, construction, or alteration of a residential structure shall include appropriate documentation indicating: (a) That the standards...
-
Issue 9: What are the top research topics that need to be undertaken (i.e., Identification of R&D Opportunities)?
That would allow federal dollars to transfer. Many of you don’t even know who we are....
- National Rehabilitation Information Center (NARIC)
- SafePath: ADA Entry Level Landing Installation Training Video
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508 Standards consistent...
-
M101.1 Purpose
The proposed standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....
-
4.3.4 Knee and Toe Clearances
This makes it difficult to take anthropometric data and apply it to the existing standards....
-
11B-202.3.1 Prohibited reduction in access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Multiple Single-User Toilet Rooms
Where multiple single-user toilet rooms are clustered in a single location, fifty percent (50%), rather than the one hundred percent (100%) required by the 1991 Standards, are required to...
-
B.3.iv - Who makes the determination that a product meets equivalent facilitation?
The vendor may assert that its product meets or exceeds the level of accessibility required by a particular standard through equivalent facilitation....
-
24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
In determining what is an appropriate grab bar, builders are encouraged to look to the 1986 ANSI A117.1 standard, the standard cited in the Fair Housing Act....
-
§ 36.304(d)(2)(iii)
., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
-
Alterations and Additions
This guide provides an introduction to the scoping requirements that form the basis for the Department of Justice’s 2010 ADA Standards and the Department of Transportation's ADA Standards...
-
11B-202.3.1 Prohibited reduction in access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....
-
Introduction
The ADA Accessibility Guidelines (ADAAG) is the standard applied to buildings and facilities....