roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have...
Search Results "AHJ: Authority Having Jurisdiction"
Filters
Commonly Searched Documents
-
608.2.2 Standard Roll-In Type Shower Compartments
-
Getting In
Building entries must be flush with the grade of the outside access route and have a beveled doorsill that is not more than one-half inch high....
-
C. Contrast
Are all signs at this lodging facility made without reflective materials, such as, brass, chrome, gold, glass or mirror used as text or background, and have letter and numbers that contrast...
-
K. Operable Parts
wands and controls on fixed lamps and HVAC units easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have...
-
407.4.7.2 Keypads
The number five key shall have a single raised dot. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
225(c)(1)
(1) with respect to intrastate telecommunications relay services in any State that does not have a certified program under subsection (f) of this section and with respect to interstate telecommunications...
-
Section 2. Ground floor
A building may have one or more ground floors....
-
Contractor:
For example, carriers often have business arrangements with companies to provide wheelchair service to passengers with disabilities or to handle baggage. [Sec. 382.7]...
-
4.7.11 Islands
Any raised islands in crossings shall be cut through level with the street or have curb ramps at both sides and a level area at least 48 in (1220 mm) long between the curb ramps in the part...
-
FAQ: What does Corada mean?
We have input federal ADA standards and regulations and connected access-related content, such as technical assistance, products and services, how-to videos, CAD/BIM files, design ideas,...
-
3.4.4 Clear Ground Space and Turning Space
Each viewing area that is required to be accessible by section 3.4.1 shall have a clear ground or floor space 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum positioned for either...
-
Door Closing Speed Tool
We have this tool in a heavy, poly-plastic that will hold up to the rigors of architectural surveys. It's also waterproof and cleanable!...
-
Sides of Curb Ramps [§406.3]
Sides of Curb Ramps [§406.3] Curb ramps can have returned sides, but a top landing is required under all conditions to allow maneuvering to and from the run....
-
16(a)(v)
(v) The accessible rooms for individuals with mobility disabilities have the maneuvering clearances for beds specified in ADA Standards §9.2.2(1), to and within the bathroom (ADA Standards...
-
Rise [§405.6]
.), but there is no limit on the number of runs a ramp may have. Long ramps with many runs can be strenuous for people using manual wheelchairs....
-
§ 38.113(a)(1)
required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this part are located, and at least one adjacent doorway into coach passenger compartments shall have...
-
Dyson Airblade V Hand Dryer - A Welcome Break from Conventional Hand Dryers
A total of over 500 Dyson Airblade V hand dryers have been installed in Welcome Break washrooms around the UK by 60 Dyson Field Service Engineers....
-
Grohe America Allure Brilliant Faucet
Our designers and engineers have taken on the roles of lapidaries, refining and polishing with utmost care to create a collection of intriguing designs, which will challenge your perception...
-
BTX Intelligent Fashion Tumo Programming Reverse Motor Direction
BTX systems have been installed in homes across the world for homeowners seeking a new edge on technology, increased security and light control, or an easier way to open and close their...
-
Appendix C: Previous Research on the Visibility of Detectable Warning Surfaces
Five of these materials were described as having a yellowish appearance and one was described as grayish red....
-
Sections 1630.2(j)(5) and (6) Examples of Mitigating Measures; Ordinary Eyeglasses or Contact Lenses
These definitions have been more fully discussed in the portions of this interpretive guidance concerning the rules of construction in §1630.2(j)(1)....
-
a. Public Television and Videos
For persons who are blind or have low vision, detailed audio description may be added to describe important visual images....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
§382.57(c)(6)(iv)(B) Tactile symbols
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
