Generally only one stall must be accessible (standard five-by-five feet)....
Search Results "Industry Standard"
Filters
Commonly Searched Documents
-
12) Bathrooms
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-903.3 Size
[2010 ADA Standards] 903.3 Size. Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
11B-604.8.1.2 Doors
[2010 ADA Standards] 604.8.1.2 Doors....
-
501.1 Scope (Section-by-Section Analysis)
The value of promoting a single harmonized standard outweighs any small benefit that might be achieved by conforming to overlapping, but separate, standards....
-
410.1 General
Platform lifts shall comply with ASME A18.1 (1999 edition or 2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
F203.2 Existing Elements
Elements in compliance with an earlier standard issued pursuant to the Architectural Barriers Act or Section 504 of the Rehabilitation Act of 1973, as amended, shall not be required to comply...
-
Curb Ramps at Marked Crossings and Vehicular Lanes
In the final rule, requirements for the general location of curb ramps that were provided at [DOT ADA Standards] section 406.8 in the proposed rule have been integrated into this provision...
-
Scoping Requirements for Elevators
Scoping requirements for elevators in section 206.6 reference technical criteria for standard passenger elevators, destination-oriented elevators, existing elevators that are altered, limited-use...
-
Braille Specifications
A similar clarification has been included in the new ANSI A117.1 standard....
-
224.6 Housing at a Place of Education
For the purposes of the application of this section, the term "sleeping room" is intended to be used interchangeably with the term "guest room" as it is used in the transient lodging standards...
-
307 Protruding Objects
Objects mounted on walls above the standard sweep of canes (i.e., higher than 27 inches from the floor) and below the standard head room clearance (80 inches), are limited to a 4 inch depth...
-
410.1 General
Platform lifts shall comply with ASME A18.1 (1999 edition or 2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
6. Transfer Surface Height
As such every inch is significant both for designing tables that can go low enough to meet the new standard and in design of accessories or room siting as alternate means to attempt to meet...
-
410.1 General
Platform lifts shall comply with ASME A18.1 (1999 edition or 2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
206.2.4 Spaces and Elements
Florida requirements may be waived down to the ADA Standards requirements....
-
C.1. - Who within the agency is responsible for ensuring EIT purchases comply with Section 508?
Acquisition of EIT that meets the applicable technical provisions of the Access Board’s standards is the shared responsibility of requiring activity officials and contracting officials....
-
Federal Publications
ADA Standards for Accessible Design ADA Update: A Primer for State and Local Governments A Guide to the ADA Standards for Accessible Design Accessibility of...
-
B1
[ADA Standards § 4.1.2(5)(a)] Yes No Total Number of Parking Spaces in Each Parking Area Required Minimum Number of Accessible Spaces ...
-
Paragraph (b) (Advisory Guidance)
Individuals using audio peripheral devices such as amplifiers, telecoil adapters, or direct-connection into a hearing aid need a standard, noise free way to tap into the audio generated...
-
Product Data and Unit Costs
The Access Board and Eastern Research Group did not evaluate the products for conformance with the proposed standards and do not endorse any of the products included in the sample....
-
Background
When the 2010 ADA Standards for Accessible Design (2010 ADAS) were adopted by DOJ on September 15, 2010, these became the initial basis for the accessibility requirements of CBC Chapter...