Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear floor space, grab bar, and operation requirements...
Search Results "Floor Designation"
Filters
Commonly Searched Documents
-
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Note: When assigned parking is provided, Chapter 11A indicates designated accessible parking for the adaptable residential dwelling units shall be provided on requests of residents with...
-
11B-812.5.4 Arrangement
Vehicle spaces and access aisles shall be designed so that persons using them are not required to travel behind vehicle spaces or parking spaces other than the vehicle space in which their...
-
4.3.6 Reach Limits
mm (3.9 in. x 3.9 in.) target location in space at a given height from the floor....
-
Spectrum Aquatics Gallatin Water Powered Assisted Access Lift
The Gallatin water powered assisted access lift is designed to accommodate both in-ground pools and spas without customization....
-
902 Dining Surfaces and Work Surfaces
Clear floor space is required for a forward approach (902.2), and a surface height of 28 to 34 inches is specified (902.3)....
-
Minimum Clear Opening
The issue of minimum clear opening for doors was one of the most widely commented-upon design features of the guidelines....
-
Note
Note: Grab bars can be designed so they do not increase suicide risk....
-
§35.172(b)
(b) If the designated agency finds noncompliance, the procedures in §§35.173 and 35.174 shall be followed....
-
Executive Summary
, lighting design, professional associations, government, academia, advocacy, research and development with the following objectives: Identify existing guidance for design and obtain...
-
Halsey Taylor Cane Touch Apron for HAC ADA Series
Cane Touch Apron model 42522 for HAC ADA Series GENERAL: The cane touch apron is an optional accessory designed to satisfy customer preference for symmetry on HAC bi-level units as the...
-
1. Side grab bar
Side grab bar: There is a grab bar on the adjacent side wall that is at least 40 inches long and from 33 to 36 inches above the floor....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
708.4 Residential Dwelling Unit Communication Systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with 708.4....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
5.1.4 Transfer Surface Height Measurement
The transfer surface height should be measured from the floor to the highest point on the seat in an uncompressed state, inclusive of bolsters....
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
5.3.5 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space required by 5.3.2.1....
