FIGURE 11B-607.4.2 GRAB BARS FOR BATHTUBS WITH REMOVABLE IN-TUB SEATS...
Search Results "Patient in Seated Position"
-
11B-607.4.2.3 Head end wall
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
§ 37.91(a)(2)
(2) To fold and store wheelchairs (to accommodate individuals who wish to transfer to coach seats) equal to not less than one half the number of single level rail passenger coaches in the...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
Why Consumers Are Choosing Black-Owned Online Marketplaces
As more people seek meaningful shopping experiences and want their purchases to have a positive impact, Black-owned online marketplaces continue to attract loyal customers and expand their...
-
Carr Corporation Folding Work Desk/Charting Stations
Ideal for busy O.R.s, exam rooms, patient room corridors or nurse stations. Use it for charting, paperwork, laptop data entry or instrument placement....
-
Recommendations
a minimum flat surface of 33 in. length for platforms accommodating wheeled mobility devices excluding scooters aids that can help wheelchair users mount the platform and position...
-
R308.1.2.1 Platform and Vehicle Floor Coordination
Boarding platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements in 49 CFR parts 37 and 38....
-
12113(c) Qualification standards and tests related to uncorrected vision
selection criteria based on an individual’s uncorrected vision unless the standard, test, or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
Conclusion
The opinions expressed herein do not necessarily reflect the position or policy of the U.S. Department of Labor....
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
Latch-side clearance not only provides proper positioning at door hardware but also facilitates proceeding through doors against the force of closers....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
BEA Inc. LZR-Microscan Swinging Door Sensor
The LZR-microscan automatically adapts and adjusts its detection zones based on the door's position, ensuring complete and consistent safety. ...
-
11B-607.4.1.2 Control end wall
FIGURE 11B-607.4.1 GRAB BARS FOR BATHTUBS WITH PERMANENT SEATS...
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
§382.141(a)
(a) As a carrier that operates aircraft with 19 or more passenger seats, you must provide training, meeting the requirements of this paragraph, for all personnel who deal with the traveling...
-
2b
Are all large showers free of curbs or lips at the shower floor that would impede wheelchair approach and transfer onto the folding shower seat?...
-
12186(a)(2)(C) Limitation on requiring installation of accessible restrooms
restrooms The regulations issued pursuant to this paragraph shall not require the installation of accessible restrooms in over-the-road buses if such installation would result in a loss of seating...
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
