The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
Search Results "Extended Floor Surface"
Commonly Searched Documents
-
11B-502.3.3 Marking
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
BS8300:2001 Research
information was not provided about how measurements were made when the toe was not as far forward as the footrest or other part of the device (e.g. scooter body) or when footrests did not extend...
-
Refreshment Table
Refreshment Table: If refreshments are served, allow sufficient floor space for people with mobility disabilities to approach the tables....
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
- Pilot Rock HRE and HRP Hitching Post Bike Rack
-
Benches
Do not allow the slope of the clear floor or ground space to exceed 1:48 (2 percent) in any direction, except if the surface isn't paved or built with boards, the slope may be up to 1:33...
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
Passing Spaces [1017.4]
The intersection of two trails that provide a T-shaped space that complies with section 304.3.2 of the ABA Standards (figure 5), and the base and the arms of the T-shaped space extend...
-
Location and Size
The side rails are 20 inches minimum in length, 6 inches minimum in height above the table surface, and 1 inch measured horizontally from the adjacent edge of the table surface....
- AJW Architectural Products US888 Single Security Toilet Tissue Dispenser, Exposed Mounting - Surface Mounted - Non-Controlled
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
to fit underneath the equipment so that the patient could be raised out of their mobility device, moved over to the medical diagnostic equipment, and then be lowered onto the transfer surface...
-
Sections 505.10.2 and 505.10.3
The requirement in the 1991 Standards that handrails extend horizontally at least 12 inches beyond the width of one tread at the bottom of a stair was changed in the 2004 ADAAG by the Access...
-
B. The ADA Standards for Accessible Design
counters” designed to accommodate a parallel approach by a person in a wheelchair “shall comply with 904.4.1,” and further directs that “[t]he accessible portion of the counter top shall extend...
-
Camp Shelters
Ensure that the surface of the clear floor or ground space at the open entrance side of the shelter and the floor of the shelter is firm, stable, and does not slope more than 2 percent (...
- AJW Architectural Products US40 Collapsable Security Hook Strip 18"L, 4 Hooks, Exposed Mounting - Surface Mounted
-
ASTM: ADA Standard Section 105.2.3
Section 105.2.3 of the ADA Standards cover references to the American Society for Testing and Materials (ASTM) standards.
- Boost Your Business - Chapter 12 - Elevators
-
11B-705.1.2.2.2 Parallel curb ramps
Detectable warnings shall extend the full width of the turning space at the demarcation between the street and the sidewalk less 2 inches (sic) (51 mm) maximum on each side....
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...