Input, control, and mechanical functions shall be locatable, identifiable, and operable in accordance with each of the following, assessed independently:...
Search Results "Door Control"
-
§1193.41 Input, control, and mechanical functions.
-
Inclusion Solutions BigBell™ Alert System
Six ring tones and adjustable volume control. Up to 2,000-foot unobstructed operating range. Available in two styles: BigBell Basic and BigBell Max....
-
1010.2 Door operations
...
-
1010.2 Door operations
...
-
408.4.1 Car Dimensions and Doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (815 mm) minimum clear width. EXCEPTIONS: 1....
-
408.4.1 Car Dimensions and Doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (815 mm) minimum clear width. EXCEPTIONS: 1....
-
4.29.3* TACTILE WARNINGS ON DOORS TO HAZARDOUS AREAS
Doors that lead to areas that might prove dangerous to a blind person (for example, doors to loading platforms, boiler rooms, stages, and the like) shall be made identifiable to the touch...
-
Utilities at Recreation Sites
Ensure controls and operating mechanisms for utilities comply with the technical requirements for reach ranges and operability specified in ABAAS, sections 308 and 309, which are explained...
-
Controlled Descent Devices (cables and chutes)
These include controlled descent devices of various types. These cable devices usually use a strap or chair secured to the cable by a device that is squeezed to allow descent....
-
Check the location of the APS; is it close to the crosswalk it controls?
Check the location of the APS; is it close to the crosswalk it controls?...
-
Use of the International Symbol of Accessibility and Other Signs
On the door to an accessible area of refuge inside multistory buildings. At an accessible means of egress out of a building....
-
11B-206.2.3 Multi-story buildings and facilities
In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab. 7.     Reserved....
-
11B-206.2.3 Multi-story buildings and facilities
In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab. 7. Reserved....
-
11B-206.2.3 Multi-story buildings and facilities
In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab. 7. Reserved....
-
iLove Stories of Independence: Todd Stabelfeldt
Published on Aug 18, 2014 An amazing insight on how technology is empowering independence. The clip shares the positive impact on two people, how one person is sharing it with...
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Plumbing/Restrooms
PLUMBING/RESTROOMS Turning space within the room 11B-603 Door swing not in clear floor space of any fixture (except...
-
203.9 Employee Work Areas
Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with...
-
203.9 Employee Work Areas
203.9 Employee Work Areas. Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so...
