The device shall be capable of completing these operations without requiring contact for an obstruction passing through the opening at heights of 5 in and 29 in (125 mm and 735 mm) from...
Search Results "Seat Height"
Commonly Searched Documents
-
4.10.6* DOOR PROTECTIVE AND REOPENING DEVICE
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
§ 38.23(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed...
-
11B-303.5 Warning curbs
(102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches (152 mm) in height...
- Harmar P300 Pool Lift
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Lumber
-
11B-213.3.1 Toilet compartments
Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment. ◼...
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
- Landscape Forms Inc. Strata Bench Collection
-
When door vision lights are limited to 100 square inches by the fire code, is compliance with the specified maximum height of 43” to the bottom edge still required?
Yes. The Standards do not exempt such doors from the requirement for vision lights (§404.2.11). However, compliance is not required when the lowest part of the vision light is more...
-
608.2.2.1 Clearance
minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat...
-
5. Notice to Patrons
Notice to Patrons After modifications specified in Sections 3.1-3.11 have been completed at each Modified Theater, Cinemark will provide notice that wheelchair seating locations in those...
-
608.2.2.1 Clearance
minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat...
-
T704.3.1 Automated Stop Announcements
Signs shall be viewable onboard from all wheelchair spaces and priority seats for passengers with disabilities....
-
§ 35.138(a) General
public entity that sells tickets on a preassigned basis shall modify its policies, practices, or procedures to ensure that individuals with disabilities can purchase tickets for accessible seating...
-
5.3.4 Grab Bars
In such cases, the riser shall have vertical or nearly vertical sides and a flat area on each side of the seat that is about 3 inches (75 millimeters) wide....
-
5.3.4 Grab Bars
In such cases, the riser shall have vertical or nearly vertical sides and a flat area on each side of the seat that is about 3 inches (75 millimeters) wide. ...
-
§ 37.101(e) Demand Responsive System, Vehicle Capacity of 16 or Fewer
Entities providing demand responsive transportation covered under this section are not specifically required to ensure that new vehicles with seating capacity of 16 or fewer are accessible...
-
§ 37.3 Vanpool
Vanpool means a voluntary commuter ridesharing arrangement, using vans with a seating capacity greater than 7 persons (including the driver) or buses, which provides transportation to a...
-
11B-1009.2.7 Operation
The lift shall be stable and not permit unintended movement when a person is getting into or out of the seat. [2010 ADA Standards] 1009.2.7 Operation....
- Arcadia's Arched Benches
- Kompan, Inc. M143 - Albatross Seesaw
-
Examination Chair
Diagnostic equipment with a seat in which a patient typically is positioned with buttocks approximately parallel to the ground and shins approximately perpendicular to the ground....
-
219 Assistive Listening Systems
Section 219.3 specifies the minimum number of receivers according to a sliding scale based on the seating capacity of the assembly area....