Exception: Where security barriers incorporate elements that cannot comply with these requirements such as certain metal detectors, fluoroscopes, or other similar devices, the accessible...
Search Results "Door Signal Device"
-
11B-206.8 Security barriers
-
11B-407.4.9 Emergency communication
Raised symbols or characters, white on a black background, and Braille shall be provided adjacent to the device and shall comply with Sections 11B-703.2 and 11B-703.3....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-P
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-V
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
4.28.1 General
At a minimum, visual signal appliances shall be provided in buildings and facilities in each of the following areas: restrooms and any other general usage areas (e.g., meeting rooms), hallways...
-
Executive Summary
We also measured performance during door use tasks via the use of observational rating scales....
-
R206 Pedestrian Street Crossings (Section-by-Section Analysis)
Pedestrian Street Crossings (Section-by-Section Analysis) Pedestrian street crossings must comply with technical requirements in Chapter R3 that reference MUTCD standards for pedestrian signal...
-
Scoping Requirement for Alarms
The proposed requirement (215.2 in the proposed rule) specified audible and visible signals but did not reference any specific technical criteria, including any addressing placement or photometric...
-
R208.2 Where Not Required
Where a cut-through pedestrian refuge island is less than 1.8 m (6.0 ft) in length and the pedestrian street crossing is signalized, the signal should be timed for a complete crossing of...
-
11B-215.1 General
Unlike audible alarms, visible alarms must be located within the space they serve so that the signal is visible....
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
2.1.2.1 Summary of IEC 118‒4 (1981) Standards With a source of 1000 Hz equal to the long-time average level of the speech signal applied to the input of the system, the resulting field...
-
11B-215.1 General
Unlike audible alarms, visible alarms must be located within the space they serve so that the signal is visible....
-
4.28.2* Audible Alarms
Sound levels for alarm signals shall not exceed 120 dbA....
-
9.1 GENERAL
In addition, employee toilet rooms, water fountains, lunchrooms, lounges, attendance-recording equipment, medical treatment rooms, emergency signals, and switches and controls shall be made...
-
4.28.2* AUDIBLE ALARMS
Sound levels for alarm signals shall not exceed 120 decibels....
-
Speed Queen Quantum Single Load Dryer Front Control Stainless Steel Cabinet
Features Industry's Largest Door Opening 2.06 sq. ft. (1914 cm²). Quiet, Efficient Blower System. End-of-Cycle Signal....
-
702.7.2 ITU-T Recommendation G.722.2, Series G
Transmission Systems and Media, Digital Systems and Networks – Digital terminal equipment – Coding of analogue signals by methods other than PCM, Wideband coding of speech at around 16 kbit...
-
§1193.37 Information pass through.
In particular, signal compression technologies shall not remove information needed for access or shall restore it upon decompression....
-
Can hall and in-car signals be displayed horizontally (i.e., side-by-side) instead of vertically (i.e., one above the other)?
Yes, hall signs can be displayed horizontally instead of vertically. However, with call buttons, the button designating the up direction must be located above the one indicating the...
-
Don-Jo Mfg., Inc. Door Viewers ULDV 180
Number ULDV 180 Dimensions 180 Degrees Ansi L23221 Shelf pack 10 Finishes 605,...
-
Don-Jo Mfg., Inc. Door Viewers DV 180
Number DV 180 Dimensions 180 Degrees Ansi L21371 Shelf pack 10 Finishes 605,...
-
Don-Jo Mfg., Inc. Door Viewers DV 90
Number DV 90 Dimensions 160 Degrees Ansi L21372 Shelf pack 10 Finishes 605,...
