Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
Back Support: ADA Standard Section 903.4
-
11B-705.1.1.3 Color and contrast
Detectable warning surfaces shall comply with Section 11B-705.1.1.3.1. The material used to comply with this section shall be an integral part of the detectable warning surface....
-
11B-1007.2 Accessible routes
Accessible routes located on playing surfaces of miniature golf holes shall be permitted to use the exceptions in Section 11B-1007.2....
-
R204.2 Pedestrian Circulation Paths
facilities required by this document and to accessible routes required by section 206.2.1 of appendix B to 36 CFR part 1191 or section F206.2.1 of appendix C to 36 CFR 1191 that connect building...
-
Element
An architectural or mechanical component of a building, facility, space, or site....
-
Accessible
A site, building, facility, or portion thereof that complies with this part....
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Building Entrance: The raised threshold at the polling entrance exceeds 1/2 inch (1991 ADA Stds 4.13.8; 2010 ADA Stds 404.2.5)....
-
Background
This is especially the case with issues related to surfaces....
-
Hadrian Inc. Stainless Steel Toilet Partitions
Industry-best Fire Resistance Most fire-resistant toilet partition material available....
-
Corbin Russwin Inc. BLSS Trim Lever Handle & Lockset
Sloping surfaces and overlapping rose and lever address safety concerns common in behavioral health facilities....
-
When door vision lights are limited to 100 square inches by the fire code, is compliance with the specified maximum height of 43” to the bottom edge still required?
Yes. The Standards do not exempt such doors from the requirement for vision lights (§404.2.11). However, compliance is not required when the lowest part of the vision light is more...
-
Camping Units
The camp living area is the space where tables, fire rings, and grills are located. This area is often adjacent to the parking spur....
-
1133B.7.1
SECTION 1133B GENERAL ACCESSIBILITY FOR ENTRANCES, EXITS AND PATHS OF TRAVEL 1133B.7 Walks and sidewalks. 1133B.7.1 Continuous surface. ...
-
General: ADA Standard Section 202.1
Section 202.1 of the ADA Standards covers the most current information on additions and alterations to existing buildings and facilities.
-
Size: ADA Standard Section 1008.3.1.1
Transfer platforms shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
Size: ADA Standard Section 1008.3.2.1
Transfer steps shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-206.5.2 Rooms and spaces
Within a building or facility, every door, doorway or gate serving rooms and spaces complying with this chapter shall comply with Section 11B-404....
-
11B-213.3 Plumbing fixtures and accessories
The 2016 California Plumbing Code (CPC), Table 422.1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in...
-
SHOPPING CENTER (OR SHOPPING MALL)
For the purposes of this section, “shopping center” or “shopping mall” includes a covered mall building. Advisory Definition of SHOPPING CENTER (or SHOPPING MALL). ...
-
11B-207.1 General
Means of egress shall comply with section 1003.2.13 of the International Building Code (2000 edition and 2001 Supplement) or section 1007 of the International Building Code (2003 edition...
-
Mirrors: ADA Standard Section 603.3
Section 603.3 covers the current ADA Standards for mirrors in toilet and bathing rooms.
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
