Selection of Trail Surface Materials A review of trail surfacing products conducted for this project identified approximately 80 different trail surface materials that promoted providing...
Search Results "Recreational Surfacing"
-
Selection of Trail Surface Materials
-
R302.7.2 Vertical Surface Discontinuities
R302.7.2 Vertical Surface Discontinuities. Vertical surface discontinuities shall be 13 mm (0.5 in) maximum....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Stabilized Engineered Wood Fiber for Accessible Trails
Laufenberg Abstract Trails made with wood chips are difficult for those who use mobility aids because the surface is soft, uneven, and shifting....
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
However, if the surface of the outdoor recreation access route is paved or built with boards, the cross slope must not be steeper than 1:48 (2 percent)....
-
Surface discontinuities
Differences in level between two adjacent surfaces. Elevation changes due to ramps or stairs do not, themselves, constitute surface discontinuities....
-
Permitted Protrusions in Wheelchair Spaces: ADA Standard Section 1002.4.4.3
protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum above the floor or ground surface...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground surface...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground surface...
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
1012.4 Surface
This section requires the surface of parking spaces and pull-up spaces to be firm and stable....
-
TechniSoil G3® Pathway Stabilizer Video
Requires the Registered User plan or above. Login! -
Selecting an Accessible Play Surface Is One of the Most Important Decisions
Selecting an Accessible Play Surface Is One of the Most Important Decisions The U.S....
-
R409.8 Surfaces
R409.8 Surfaces. Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
T402.5 Surfaces
Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
Unitary Surface
Unitary Surfaces. The predominant surface characteristic is whole. ...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
floor to have a smooth surface on the push side....
-
902 Dining Surfaces and Work Surfaces
902 Dining Surfaces and Work Surfaces...
-
226 Dining Surfaces and Work Surfaces
226 Dining Surfaces and Work Surfaces...