Issue 1: APS volume Louder is NOT better. It is common to find APS volumes set so loud that the pushbutton locator tone and audible walk indication can be heard at midblock or...
Search Results "Recessed Button"
Commonly Searched Documents
- 
    
  
  Issue 1: APS volume
  
- 
    
  
  4.31.3* Mounting Height
  The highest operable part of the telephone shall be within the reach ranges specified in 4.2.5 or 4.2.6. 
- 
    
  
  Accessible Sidewalks 3: Pedestrians with Low Vision 
  Requires the Registered User plan or above. Login!
- 
    
  
  Type: ADA Standard Section 407.4.7.1.1
  Section 407.4.7.1.1 covers the current ADA Standards for type of designations and indicators required on elevator car control button. 
- 
    
  
  Tactile arrow
  Tactile arrow The tactile arrow on the device must be aligned with the direction of travel on the crosswalk and point toward the street crossing that the pushbutton controls and... 
- 
    
  
  Issue 2: Location relative to the crosswalk
  Issue 2: Location relative to the crosswalk An APS that is mounted outside the crosswalk area may provide misleading information about the crossing location. Pedestrians who are... 
- 
    
  
  Issue 13: Stub poles
  Issue 13: Stub poles Figure 15: APS is located on mast arm pole more than 10 feet outside the crosswalk lines. In addition, a fire hydrant is between the crosswalk location... 
- 
    
  
  Existing Elevators (Alterations)
  Alterations to Existing Elevators The Standards apply to existing elevators that are altered. Compliance is determined by the scope of the project. For example, if a car... 
- 
    
  
  11B-407.4.7.1 Buttons
  Car control buttons shall comply with Section 11B-407.4.7.1.... 
- 
    
  
  Issue 9: Reach (how far?)
  Issue 9: Reach (how far?) APS devices can be located in landscaped areas if the pushbutton is reachable from a level paved area. Figure 12 shows a location where new APS (and new... 
- 
    
  
  Issue 5: Tactile arrow (in line)
  Issue 5: Tactile arrow (in line) Figure 9: Tactile arrow not aligned with crosswalk direction. Figure 10: Location where tactile arrow is aligned with direction of travel... 
- 
    
  
  Appendix: Checklist for APR Installations
  Appendix: Checklist for APR Installations (adapted from “Accessible Pedestrian Signals: A Guide to Best Practice”, NCHRP Web-only document 117A). Once installation is complete,... 
- 
    
  
  11B-411.4.7.4 Button spacing
  Button spacing shall comply with Section 11B-407.4.7.1.5.... 
- 
    
  
  Significant alternatives which minimize any significant economic impacts on small entities
  Significant alternatives which minimize any significant economic impacts on small entities The regulatory assessment analyzes the following four requirements in the proposed... 
- 
    
  
  11B-407.4.7.1.5 Button spacing
  A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons.... 
- 
    
  
  Accessible Sidewalks 4: Pedestrians who are Blind
  Requires the Registered User plan or above. Login!
- 
    
  
  Elevator Door Requirements [§407.3]
  Elevator Door Requirements [§407.3] 
- 
    
  
  407.4.7.1 Buttons
  407.4.7.1 Buttons. Car control buttons shall comply with 407.4.7.1.... 
- 
    
  
  Activation button
  Activation button The audio buttons are located in the center of the panels and under the text. Participants expressed concern over the difficulty of finding it.... 
- 
    
  
  Keypad Buttons
  The proposed rule, in addressing elevator car controls, required that telephone-style keypad buttons, where provided, be identified by raised characters centered on the keypad button (407.2.11.2... 
- 
    
  
  1991 / 1994 ADA Standards - Plan Review Tool - Doors
  1991 / 1994 ADA Standards - Plan Review Tool - Doors Click here to view/download the pdf, Page 1 of 2 (256 KB) Click here to view/download the pdf, Page 2 of 2 (272 KB) * *... 
- 
    
  
  407.4.7.1 Buttons
  Car control buttons shall comply with 407.4.7.1.... 
- 
    
  
  407.4.7.1 Buttons
  Car control buttons shall comply with 407.4.7.1.... 
 
              