Problem Four: The entrance door has a door knob and/or latch that requires tight pinching and twisting and is not accessible....
Search Results "Privacy Latch"
Commonly Searched Documents
-
Problem Four (Entrance)
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
- AD Systems’ Patient Restrooms
- Hadrian Inc. Stainless Steel Toilet Partitions
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
DOORS MINIMUM MANEUVERING CLEARANCE Approach direction Perpendicular to doorway Parallel to doorway (beyond stop/latch...
-
Problem Four (Accessible Route)
If it is impossible to relocate the voting area for all voters, find a location for an accessible voting station that offers the same privacy as the other voting area....
-
H. Door Maneuvering Clearance
.: entry door, connecting room door, bathroom doors and other passage doors) in every accessible guestroom/suite, are there at least 18" of clear floor space on the latch side for persons...
-
4.13.6 Maneuvering Clearances at Doors
EXCEPTION: Entry doors to acute care hospital bedrooms for in-patients shall be exempted from the requirement for space at the latch side of the door (see dimension “x” in Fig. 25) if the...
-
End-of-Row Stalls
If an out swinging door is provided at an end-of-row stall, maneuvering space of at least 18 inches at the latch side pull side must be provided....
-
Door Closers [4.13.10]
ADAAG requires that the sweep period of the closer be adjusted so that from an open position of 70 degrees, the door will take at least 3 seconds to move to a point 3 inches from the latch...
-
Maneuvering Clearances at Doors [4.13.6]
Latch-side clearance is needed on the push side to be able to operate a latch and maneuver through the door against the force of a closer....
-
General Provisions
Such auxiliary aids and services must be provided in accessible formats, in a timely manner, and in such a way as to protect the privacy and independence of the individual with a disability...
-
1022.9 Stairway identification signs
Chapter 11A, Section 1143A or Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5 shall be located at the landing of each floor level, placed adjacent to the door on the latch...
-
4.13.6 MANEUVERING CLEARANCES AT DOORS
Entry doors to acute care hospital bedrooms for in-patients shall be exempted from the requirement for space at the latch side of the door (see dimension "x" in Fig. 25) if the door is at...
- Hadrian Inc. Powder Coated Toilet Partition
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
The Department has determined that a lock, latch or other door hardware in the bottom 10 inches of a door (such as an exposed bottom rod for a panic device, surface latch or door stop) may...
-
§27.121(c) Access to sources of information.
Considerations of privacy or confidentiality do not bar the Department from evaluating or seeking to enforce compliance with this part....
-
Toilet Buildings and Pit Toilets
Ensure door hardware, such as handles, pulls, latches, and locks, complies with the technical requirements for reach ranges and operability specified in ABAAS sections, 308 and 309 and explained...
- Scranton Eclipse Partitions
- Corbin Russwin Inc. BHSS Trim Specialty Door Hardware
-
Procedural Safeguards
Section 504 and the Education of Children with Disabilities (FAQ 45) (last modified Oct. 16, 2015), www.ed.gov/ocr/504faq.html. 137 Another law called the Family Educational Rights and Privacy...