Door reopening devices shall remain effective for 20 seconds minimum....
Search Results "Out-Swinging Door"
Filters
Commonly Searched Documents
-
11B-407.3.3.3 Duration
-
A4.13.11(2) Sliding or folding doors
(2) Sliding or folding doors: Force applied parallel to the door at the door pull or latch....
-
A4.13.11(2) Sliding or folding doors
(2) Sliding or folding doors: Force applied parallel to the door at the door pull or latch....
-
A4.13.12 Automatic Doors and Power-Assisted Doors
Sliding automatic doors do not need guard rails and are more convenient for wheelchair users and visually impaired people to use....
-
A4.13.12 AUTOMATIC DOORS AND POWER-ASSISTED DOORS
Sliding automatic doors do not need guard rails and are more convenient for wheelchair users and visually impaired people to use....
-
Contact: ADA Standard Section 407.3.3.2
Section 407.3.3.2 covers the current ADA Standards for the contact requirements of an elevators reopening device.
-
11B-407.3.3.2 Contact
The device shall not require physical contact to be activated, although contact is permitted to occur before the door reverses....
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
Five Knuckle - Half Surface Swing Clear Hinge BB1270 - Ball Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaf - Non-rising removable pin with button...
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
Three Knuckle - Full Surface Swing Clear Hinge AB7523 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8321 - Beveled surface leaves - Non-rising...
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
Five Knuckle - Full Surface Swing Clear Hinge BB1266 - Ball Bearing - Heavy Weight Description: - ANSI A8321 - Beveled surface leaves - Non-rising removable pin with...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
Three Knuckle - Half Surface Swing Clear Hinge AB7534 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaves - Non-rising removable...
-
Counter Surface Height
Specifications are provided for the counter surface height of check-out aisles, including the height of counter edge protection, which is limited to 2 inches above the counter surface (904.3.2...
-
Entry Doors
Entry Doors Under the ADA Standards for Accessible Design, an accessible doorway must have a minimum clear opening width of 32 inches when the door is opened to 90 degrees....
-
11B-604.8.1.1.3 Maneuvering space with end-opening door
In a wheelchair accessible compartment with a door located in the front wall or partition (facing the water closet), either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide...
-
11B-604.8.1.1.3 Maneuvering space with end-opening door
11B-604.8.1.1.3 Maneuvering space with end-opening door....
-
11B-206.5.1 Entrances
Each entrance to a building or facility required to comply with 206.4 shall have at least one door, doorway, or gate complying with 404....
-
Reopening Device: ADA Standard Section 407.3.3
Section 407.3.3 covers the current ADA Standards for elevator reopening devices.
-
Queues and Waiting Lines: ADA Standard Section 227.5
Section 227.5 covers scoping requirements in the current ADA Standards for queues and waiting lines.
-
11B-407.3.3 Reopening device
Elevator doors shall be provided with a reopening device complying with Section 11B-407.3.3 that shall stop and reopen a car door and hoistway door automatically if the door becomes obstructed...
-
404.3.4 Doors in Series and Gates in Series
404.3.4 Doors in Series and Gates in Series. Doors in series and gates in series shall comply with 404.2.6....
-
Shelves, Sales and Service Counters, and Check-Out Aisles
Shelves, Sales and Service Counters, and Check-Out Aisles The obligation to provide program access also applies to merchandise shelves, sales and service counters, and check-out aisles...
-
11B-227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with Sections 11B-904.3 or 11B-904.4 shall comply with Section 11B-403....
-
904.3.2 Counter
The top of the counter edge protection shall be 2 inches (51 mm) maximum above the top of the counter surface on the aisle side of the check-out counter....
-
11B-904.3.2 Counter
The top of the counter edge protection shall be 2 inches (51 mm) maximum above the top of the counter surface on the aisle side of the check-out counter....
