Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
Search Results "Out-Swinging Door"
-
11B-809.8.1 Door Thresholds
-
Doors, Doorways, and Gates: ADA Standard Section 404
Section 404 covers the current ADA Standards for doors, doorways, and gates that are part of an accessible route.
-
III-4.2400 Check-out aisles
III−4.2400 Check-out aisles....
-
BEA Inc. LZR-Microscan Swinging Door Sensor
The LZR-microscan is the next generation sensor system for swing door safety. ...
-
Stanley F248 Standard Weight Plain Bearing “Swing Clear” Full Mortise Offset Door Hinge
Equipped with easily seated non-rising pins Reversible flush tips and pins Ideal for remodeling or new construction Available for full mortise application on square edge doors...
-
216.11 Check-Out Aisles
216.11 Check-Out Aisles....
-
Elevator Doors: ADA Standard Section 408.3
Section 408.3 covers the current ADA Standards for limited-use/limited-application elevator doors.
-
F216.11 Check-Out Aisles
Where more than one check-out aisle is provided, check-out aisles complying with 904.3 shall be identified by the International Symbol of Accessibility complying with 703.7.2.1....
-
216.11 Check-Out Aisles
Where more than one check-out aisle is provided, check-out aisles complying with 904.3 shall be identified by the International Symbol of Accessibility complying with 703.7.2.1....
-
Sliding Doors: ADA Standard Section 408.3.1
Section 408.3.1 covers the current ADA Standards for limited-use/limited-application elevator sliding doors.
-
Sec.36.302(d) Check-out aisles
(d) Check-out aisles....
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
Bobrick Swing-Up Grab Bar B-4998
., satin-finish stainless steel Swing-up grab bar is manually raised for approach or departure and lowered to horizontal position for support; once grab bar is raised to the full upright...
-
404.2.4.2 Doorways without Doors or Gates, Sliding Doors, and Folding Doors
Doorways less than 36 inches (915 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 404.2.4.2....
-
Check-Out Areas [8.3]
Check-Out Areas [8.3] Check-out counters at accessible lanes are held to a maximum surface height of 36 inches....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
Doorways less than 36 inches (914 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 11B-404.2.4.2....
-
Cal-Royal Products Swing Clear Hinges
Swings door completely clear of opening when door is opened 95 degrees....
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-216.11 Check-out aisles
check-out aisle identification...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
Doorways less than 36 inches (914 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 11B-404.2.4.2....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
Doorways less than 36 inches (914 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 11B-404.2.4.2....
-
Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
For corridor doors to patients’ rooms, operating rooms, emergency rooms, or wherever conditions require a completely clear opening in hospitals, institutions or public buildings Designed...
