The device shall not require physical contact to be activated, although contact is permitted to occur before the door reverses....
Search Results "Open Doors Organization"
Filters
Commonly Searched Documents
-
11B-407.3.3.2 Contact
-
Allegion Falcon SC80 Series Surface Mounted Door Control
Medium-duty applications like retail storefronts, cafes and clinics that need a closer that makes door operation smooth and secure....
-
11B-404.2.4.1 Swinging doors and gates
Swinging doors and gates shall have maneuvering clearances complying with Table 11B-404.2.4.1....
-
AUTOMATIC DOOR
A door equipped with a power operated mechanism and controls that open and close the door automatically upon receipt of a momentary actuating signal....
-
AUTOMATIC DOOR
A door equipped with a power operated mechanism and controls that open and close the door automatically upon receipt of a momentary actuating signal....
-
11B-206.5.1 Entrances
Each entrance to a building or facility required to comply with 206.4 shall have at least one door, doorway, or gate complying with 404....
-
Reopening Device: ADA Standard Section 407.3.3
Section 407.3.3 covers the current ADA Standards for elevator reopening devices.
-
11B-407.3.3 Reopening device
Elevator doors shall be provided with a reopening device complying with Section 11B-407.3.3 that shall stop and reopen a car door and hoistway door automatically if the door becomes obstructed...
-
1132A.3 Width and height of interior doors and secondary exterior doors
Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the closed position....
-
404.3.4 Doors in Series and Gates in Series
404.3.4 Doors in Series and Gates in Series. Doors in series and gates in series shall comply with 404.2.6....
-
Hager Companies 5300 Series - Heavy Duty Surface Door Closer
These design features make this closer the ideal choice for doors with a maximum weight of 250 lbs....
-
Doors
Doors: a. Main Lobby restroom: provide a restroom vestibule door with at least 18" of maneuvering clearance on the latch side of the door. See Standards ยง 4.13.6....
-
Location: ADA Standard Section 409.3.2
Section 409.3.2 covers the current ADA Standards for the location of private residence elevator doors.
-
Stanley QDC 100 Series Grade 1 Extra Heavy-Duty Door Closers
Stanley extra heavy duty, heavy duty and standard door closers are fully adjustable (1-6) out of the box - so either closer will meet all your building requirements....
-
Norton Surface Mounted Medium Duty 8000 Series Door Closer
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market....
-
410.6 Doors and Gates
Platform lifts shall have low-energy power-operated doors or gates complying with 404.3. Doors shall remain open for 20 seconds minimum....
-
Allegion Falcon SC90 Series Surface Mounted Door Control
Fixed sizes 1, 3, & 4 Single piece cast aluminum body Non-handed for left or right swinging doors Separate adjustable general speed and latch speed Heat-treated...
-
410.6 Doors and Gates
Platform lifts shall have low-energy power-operated doors or gates complying with 404.3. Doors shall remain open for 20 seconds minimum....
-
410.6 Doors and Gates
410.6 Doors and Gates. Platform lifts shall have low-energy power-operated doors or gates complying with 404.3. Doors shall remain open for 20 seconds minimum....
-
Door and Signal Timing for Hall Calls [4.10.7], Door Delay for Car Calls [4.10.8]
Timing, based on the distance between the farthest call button and the elevator door, begins with visible and audible signaling of car arrival....
-
Allegion Falcon SC60 Series Surface Mounted Door Closer
either the Rw/PA or Hw/PA arm is specified Adjustable sizes 1-5 (SC61) Single piece cast aluminum body Staked valves Non-handed for left or right swinging doors...
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
11B-404.2.4.1 Swinging doors and gates
Swinging doors and gates shall have maneuvering clearances complying with Table 11B-404.2.4.1....
-
11B-404.2.4.1 Swinging doors and gates
Swinging doors and gates shall have maneuvering clearances complying with Table 11B-404.2.4.1....
