Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface. Exceptions: 1. ...
Search Results "Grade 1 Braille"
-
11B-505.6 Gripping surface
-
10.3.1(9)
For slow moving automated guideway “people mover” transit systems, the horizontal gap in new stations shall be no greater than 1 in....
-
11B-1007.2 Accessible routes
Exceptions: 1. Playing surfaces shall not be required to comply with Section 11B-302.2 _|Carpet|_. 2....
-
1118B.3
SECTION 1124B - GROUND AND FLOOR SURFACES 1124B.1 General. ...
- AIA White Paper: A Proposal for additions to accessibility Standards for Nursing Home & Assisted Living Residents in Toileting and Bathing
- Assisted Living Directory - Connecticut Assisted Living Facilities & Senior Care
-
Conditions for Exceptions [1019]
Condition for Exception 1 Compliance is not practicable due to terrain. The phrase “not practicable” means not reasonably doable....
-
11B-107 Special conditions appeals action
See Chapter 1, Section 1.9.1.5....
-
11B-107 Special conditions appeals action.
See Chapter 1, Section 1.9.1.5....
- Panda S.12 Solid Wood Lift & Slide System
-
E205.1 General (Section-by-Section Analysis)
In turn, proposed E205 requires conformance to the Level A and Level AA Success Criteria and Conformance Requirements specified for Web pages in WCAG 2.0 or ISO 14289-1 (PDF/UA-1), both...
-
3.3.2. Audio Description Hardware Scoping Requirements
Average Number of Auditoriums* Audio Description Hardware Units Required Per Venue Type Megaplex (16+ auditoriums) 18 1...
-
M301.2.4 Unobstructed Transfer
EXCEPTIONS: 1....
-
4.8.2* Slope and Rise
The maximum slope of a ramp in new construction shall be 1:12. The maximum rise for any run shall be 30 in (760 mm) (see Fig. 16)....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
1009.8.1 System requirements
and a central control point is not a constantly attended location, a two-way communication system shall have a timed automatic telephone dial-out capability to a monitoring location or 9-1-...
-
FIGURE INDEX
Measurement Figure 703.3.2 Position of Braille Figure 703.4.1 Height of Tactile Characters Above Finish Floor or Ground Figure 703.4.2 Location of Tactile Signs at Doors Figure...
-
Ground Level and Elevated Play Components: ADA Standard Section 1008.2.1
EXCEPTIONS: 1....
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....