Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
Search Results "Golf Car Rental Area"
-
11B-411.4.10 Support rail
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-411.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
PLACE OF PUBLIC ACCOMMODATION
) An auditorium, convention center, lecture hall, or other place of public gathering; (5) A bakery, grocery store, clothing store, hardware store, shopping center, or other sales or rental...
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
§ 36.401(d)(3)
houses a shopping center or shopping mall, or a professional office of a health care provider, the floors that are above or below an accessible ground floor and that do not house sales or rental...
-
Sec.36.401(d)(3)
houses a shopping center or shopping mall, or a professional office of a health care provider, the floors that are above or below an accessible ground floor and that do not house sales or rental...
-
§100.135(b)
purposes of this section, the term appraisal means an estimate or opinion of the value of a specified residential real property made in a business context in connection with the sale, rental...
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
What distinguishes passenger loading zones from bus loading zones?
Requirements for passenger loading zones (§209.2.1) apply to any passenger loading areas except those that exclusively serve buses providing designated or specified public transportation...
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
5. Transportation Vehicles
The Access Board issued an advance notice for public commend on an update of guidelines for rail cars on February 14, 2020. ...
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA DJ# 202-37-197
-
Site Selection
However, if existing facilities, or parts of them (whether they comply with the older standards or were built before the passage of the ADA) are altered, then the altered areas must comply...
-
CASI Accessibility Construction Inspection Checklist
Items included to be inspected for compliance if provided, including but not limited to: outdoor developed areas, bus shelters, amusement rides, recreational boating facilities, fishing...
-
CALBO Accessibility Construction Inspection Checklist
Items included to be inspected for compliance if provided, including but not limited to: outdoor developed areas, bus shelters, amusement rides, recreational boating facilities, fishing...
- Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Cut Steel Plate
- Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Recycled Plastic
-
Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small.
Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small....