For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of the Federal Motor Vehicle Safety Standards...
Search Results "Brand Standards"
-
§ 38.159(d)(7) Seat belt and shoulder harness
-
11B-1008.2.5.2 Elevated
and on ramp rise for ramps connecting elevated play components, are more stringent than the ramp slope and rise restrictions prescribed at CBC 11B-405.2 and 11B-405.6, and at 2010 ADA Standards...
-
PUBLIC BUILDING OR FACILITY
[2010 ADA Standards 106.5] Public Building or Facility....
-
11B-505.3 Continuity
[2010 ADA Standards] EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
11B-405.7.4 Change in direction
[2010 ADA Standards] 405.7.4 Change in Direction....
-
11B-407.2.2.2 Visible signals
[2010 ADA Standards] 2. Existing elevators shall not be required to comply with 407.2.2.2....
-
11B-407.4.10 Support rail
. ◼ ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADA Standards....
-
11B-805.1 General
[2010 ADA Standards] 805.1 General....
-
11B-703.5 Visual characters
[2010 ADA Standards] EXCEPTION: Where visual characters comply with 703.2 and are accompanied by braille complying with 703.3, they shall not be required to comply with 703.5.2 through...
-
11B-403.7 Continuous gradient
ETA Editor's Note CBC requirement 11B-403.7 is not present in the 2010 ADA Standards. Therefore, CBC requirements related to continuous gradients are more stringent....
-
DETECTABLE WARNING
A standardized surface feature built in or applied to walking surfaces or other elements to warn persons with visual impairments of hazards on a circulation path....
-
11B-215.3 Employee work areas
[2010 ADA Standards] 215.3 Employee Work Areas....
-
106.5.57 Safe Harbor
Elements of a path of travel at a subject building or facility that have been previously constructed or altered in accordance with the April 1, 1994 Texas Accessibility Standards (TAS) are...
-
809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
Section 36.304 Removal of Barriers (Preamble, Section-by-Section Analysis)
In that sense, it can be characterized as a ‘‘lower’’ standard than the undue burden standard....
- Aquatic Access ADA-Compliant LIfts
-
National Council on Independent Living
The surface height we had recommended historically was 17 to 19 inches above the floor, which has been around for years in existing Standards....
-
§1607.10 Employment agencies and employment services.
private employment agencies and State employment agencies, which agrees to a request by an employer or labor organization to device and utilize a selection procedure should follow the standards...
-
B. Online Barriers Faced by People with Disabilities
Operating systems enable people with limited manual dexterity to move the mouse pointer using key strokes instead of a standard mouse....
-
X. Alterations
The architectural standards for accessibility in alterations are contained in the ADA Accessibility Guidelines issued by the Architectural and Transportation Barriers Compliance Board....
-
1117B.5.3
California's standards for signage are more stringent than Section 4.30 of the ADA Standards for Accessible Design. 1117B.5.3 Proportions. ...
-
105.2.5 NFPA, F105.2.5 NFPA
Copies of the referenced standards may be obtained from the National Fire Protection Association, 1 Batterymarch Park, Quincy, Massachusetts 02169-7471, (http://www.nfpa.org/). ...
-
502.3.5 Hierarchical Relationships (Section-by-Section Analysis)
This provision corresponds to existing 508 Standards §§ 1194.21(l) and 1194.22(n)....
-
Background
When the 2010 ADA Standards for Accessible Design (2010 ADAS) were adopted by DOJ on September 15, 2010, these became the initial basis for the accessibility requirements of 2013 CBC Chapter...