The costs shall not be reduced by the value of components, assemblies, building equipment or construction not directly associated with accessibility or usability....
Search Results "Designated Aisle Seat (Assembly)"
-
ADJUSTED CONSTRUCTION COST
-
4.20.4 Grab Bars
ADAAG specifications for grab bars vary slightly for bathtubs with in-tub and head of tub seats (the latter having longer bars on the sidewall and no bar on the head wall)....
-
The carrier must designate priority stowage space for at least one wheelchair in the closet or other stowage area
If there is a closet or other approved stowage area for passengers’ carry-on items of sufficient size to accommodate a folding, collapsible, or break-down wheelchair, the carrier must designate...
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
FIGURE INDEX
Figure 406.7 Islands in Crossings Figure 406.8 Detectable Warnings at Curb Ramps Subject to DOT Regulation 49CFR37.21 Figure 407.2.2.2 Visible Hall Signals Figure 407.2.3.1 Floor Designations...
-
4.1.1 Range of Examination Table and Chair Configurations
Equipment designed for patients seated or in semi-supine positions (M302) Examination chairs Dental chairs Optometric chairs Otolaryngology (ENT) chairs...
- Landscape Forms Inc. Multiplicity Bench Collection
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Accessible Route to Parking
The Board has added a requirement that spaces and access aisles be designed so that parked vehicles "cannot obstruct the required clear width of adjacent accessible routes" (502.7)....
-
Benches
In saunas and steam rooms, this floor space may be obstructed by readily removable seats....
- Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
-
711.4.2 Membrane penetrations
Penetrations of membranes that are part of a fire-resistance-rated horizontal assembly shall comply with Section 711.4.1.1 or 711.4.1.2....
-
Pool Lifts: ADA Standard Section 1009.2
There are a variety of seats available on pool lifts ranging from sling seats to those that are preformed or molded....
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
The design of the hand hold is completely sloped at about 45 degrees. My fingers slipped off unless I applied tremendous pinching force to operate....
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area.16 As...
-
II-6.2000 Choice of design standard: UFAS or ADAAG.
[See subsections ...]
-
Web Sites for Gate Designs and Suppliers in the United Kingdom
Scottish Natural Heritage http://www.snh.org.uk/publications/on-line/accessguide/gates.asp BTCV (British Trust for Conservation Volunteers)...
-
Panel 6: Interior Design (Gregory Knoop, Moderator)
[See subsections ...]
-
§27.13 Designation of responsible employee and adoption of complaint procedures.
[80 FR 13260, Mar. 13, 2015]