Unit Dimensions: 34” W x 21" H (864 mm x 533 mm) Depth (closed): 4” (102 mm) Extension (open): 21” (533 mm) Shipping Weight: 20 lbs Available in 3 colors...
Search Results "Minimum Dimension"
-
Bobrick Koala Kare Oval, Wall Mounted Baby Changing Station KB208
-
Better Living Signature Soap and Shower Dispenser 2
Installs in minutes without tools, using waterproof silicone adhesive and 2-way tape (included) Housing constructed from durable, water-resistant ABS plastic Dimensions...
-
Pilot Rock Omega Bike Rack
DIMENSIONS: 32” tall at center, 36-3/4” wide at center. FINISH: Available with hot dip galvanized finish for maximum protection. ...
-
Shower Spray Unit and Water: ADA Standard Section 608.6
Section 608.6 covers the current ADA Standards for the shower spray units and water in shower compartments.
-
1009.7.2 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
11B-608.5.2 Standard roll-in type shower compartments
standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm) minimum...
-
11B-608.5.2 Standard roll-in type shower compartments
standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm) minimum...
-
1009.7.2 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
Bradley Diplomat Soap Dispenser 6A00
Installation Verify all rough-in dimensions prior to installation. Secure separate mounting bracket with mounting screws (included) at holes provided. Unlock the cover....
-
GE® 27" Drop-In Electric Range JM250DFBB
Content Weights and Dimensions Cooktop Width 27 1/8 in Approximate Shipping Weight 124 lb Cabinet Opening 27 in...
-
Door King Inc. 1802 and 1802-EPD Electronic Programmable Directory Telephone Entry System
Surface mount dimensions: 12"H x 6.5"W x 5"D. Flush mount dimensions: 14"H x 8.375"W x 3.25"D. Options: Surface or flush mount - specify which....
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
Grades on shared use paths in independent rights-of-way should be kept to a minimum....
-
11B-1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
11B-409.3.1 Power operation
Power operated doors and gates shall remain open for 20 seconds minimum when activated....
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor. ...
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADAS] 805.3 Clear Floor or Ground Space. ...
-
11B-307.3.1 Edges and corners
, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum...
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
12204(c)(2) Sites eligible for listing in national register
.), the guidelines described in paragraph (1) shall, at a minimum, maintain the procedures and requirements established in 4.1.7 (1) and (2) of the Uniform Federal Accessibility Standards...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
Technically Infeasible
structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full and strict compliance with the minimum...
